Closed gis-cc closed 4 years ago
you need install python3 in you computer 你需要在你的电脑上安装python3
而且,需要预先用专用烧录器烧录bootloader后, 才可以使用串口烧录工具
you need install python3 in you computer 你需要在你的电脑上安装python3
而且,需要预先用专用烧录器烧录bootloader后, 才可以使用串口烧录工具
已经安装了python,如果需要给tb01刷这个mesh还需要购买专用的烧录器吗,最好能在淘宝商品购买链接上标注一下,否则买家会认为买到手就是mesh固件。
是的,我们出厂的模块TB01烧录的是AT固件,若烧录别的固件需要专用的烧录器才行。烧录器网上好像没有卖,即使有也比较贵。我们即将推出可以串口烧录的开发板,敬请期待!
是的,我们出厂的模块TB01烧录的是AT固件,若烧录别的固件需要专用的烧录器才行。烧录器网上好像没有卖,即使有也比较贵。我们即将推出可以串口烧录的开发板,敬请期待!
好吧,还好主任让先买几片试试,这次买得不多,请问AB-01/02出厂固件也是AT固件吗?
AB-02出厂是AT固件。AT系列二次开发需和我们签保密协议,比较麻烦。淘宝上TB-01我会和业务见一下,分成AT固件和Mesh固件。目前我们正在研发TB-02,可支持串口烧录,过几天可以寄给你一片尝鲜。
make flash python ../../make/Telink_Tools.py -p /dev/ttyUSB2 burn /home/q/Telink_SIG_Mesh/examples/8258_mesh/out/8258_mesh.bin make: python: Command not found ../../make/makefile:116: recipe for target 'flash' failed make: *** [flash] Error 127