如何连接小爱同学？

[ghost]

复现： ---

xzw@xzw-RTX2070:~/Telink_SIG_Mesh/example/RGBCW_Ali_Mesh/mesh$ gedit mesh_config.h 

mesh_config.h ... `125 #if __PROJECT_MESH_PRO__` `126 #define MESH_USER_DEFINE_MODE MESH_NORMAL_MODE // must normal` `127 #elif __PROJECT_SPIRIT_LPN__` `128 //#define MESH_USER_DEFINE_MODE MESH_SPIRIT_ENABLE // must spirit` `129 #define MESH_USER_DEFINE_MODE MESH_MI_ENABLE` `130 #else` `131 //#define MESH_USER_DEFINE_MODE MESH_SPIRIT_ENABLE` `132 #define MESH_USER_DEFINE_MODE MESH_MI_ENABLE` `133 #endif` ...

然后

xzw@xzw-RTX2070:~/Telink_SIG_Mesh/example/RGBCW_Ali_Mesh/mesh$ cd ..
xzw@xzw-RTX2070:~/Telink_SIG_Mesh/example/RGBCW_Ali_Mesh$ make all

---

问题出现 ---

Building file: mesh/ev.c
Building file: mesh/factory_reset.c
Building file: mesh/fast_provision_model.c
Building file: mesh/generic_model.c
Building file: mesh/light.c
mesh/light.c: In function 'set_ct_mode':
mesh/light.c:228:29: error: 'ST_TRANS_HSL_HUE' undeclared (first use in this function)
mesh/light.c:228:29: note: each undeclared identifier is reported only once for each function it appears in
mesh/light.c:229:29: error: 'ST_TRANS_HSL_SAT' undeclared (first use in this function)
mesh/light.c:230:4: error: 'HSL_set' undeclared (first use in this function)
mesh/light.c:230:12: error: expected ';' before 'HSL'
mesh/light.c:231:4: error: 'RGB_set' undeclared (first use in this function)
mesh/light.c:231:12: error: expected ';' before 'RGB'
mesh/light.c:232:4: error: 'HSL' undeclared (first use in this function)
mesh/light.c:235:4: warning: implicit declaration of function 'HslToRgb'
mesh/light.c:235:18: error: 'RGB' undeclared (first use in this function)
make: *** [mesh/mesh.mk:51：out/mesh/light.o] 错误 1
xzw@xzw-RTX2070:~/Telink_SIG_Mesh/example/RGBCW_Ali_Mesh$

[ospanic]

我们这个固件是针对天猫精灵的，没有对结果小米，所以你的问题我也回复不了。 建议你在Telink官网下载最新的SDK，按照你的思路进行修改再试一试。