Open spiro-c opened 5 months ago
This will require the addition of "height" and "width" fields in ledmap.json
.
Compatible with WLED MM.
I added "height" and "width" fields in ledmap.json - but the issue is the same
@DarthWeber Using ledmap.json ( which is the default ledmap ) is bad idea and caused us a lot of issues before version 15 . What you should do is use ledmap1.json to ledmap9.json . You can add height" and "width" fields if you like only if you are using MM else it is optional . So using ledmap.json means if something is wrong with your custom map then that would mess with your unit setup and you have no way to go back to the default ledmap as you already set your map as default . Just do not do it
@dosipod height and width are required for 2D and are available in AC since the commit above (0.15.0-b3).
I do not actually use ledmaps with 15 and only referring to the use of the default ledmap.json . I recall an issue in segmentation when "height" and "width" are used in ledmap and i hope that is not carried over .Ledmap name not changing should be next
used ledmap1.json and referred it in the presets, this seems to work right.
Thanks all of you!
Did you use the latest build from 0_15 branch adding "height" and "width" to the ledmap.json
is working there
Did you use the latest build from 0_15 branch adding "height" and "width" to the
ledmap.json
is working there
I used 15.3 from this branch and added height and width - but same issue for me.
@DarthWeber please provide ledmap.json and cfg.json. I will also require boot debug dump from serial console, similar as @spiro-c provided above.
What happened?
I have setup of remapped 16x16 2D matrix to 32x8 for my custom display using
ledmap.json
file if theledmap.json
file is present the 2D settings are not loaded fromcfg.json
you need to go to 2D settings and resave the settings already present so the 2d output can be start sending effectTo Reproduce Bug
Create 2D matrix and remap the pixels using
ledmap.json
after reboot it will not display any 2d effect need to go in 2d settings and resave setting what are already setExpected Behavior
Able to remap 2d matrix
Install Method
Self-Compiled
What version of WLED?
WLED 0.15.0-b3 (build 2404120)
Which microcontroller/board are you seeing the problem on?
ESP32
Relevant log/trace output
Anything else?
Work around is to upload
ledmap1.json
file and load from presets it will honour the remapped pixel dataCode of Conduct