search

Aircoookie / WLED

Control WS2812B and many more types of digital RGB LEDs with an ESP8266 or ESP32 over WiFi!
https://kno.wled.ge
MIT License
14.94k stars 3.23k forks source link

AP always defaults back to WLED_000000 (athom wled 0.13.0-b6) #4130

Closed scarolan closed 2 months ago

scarolan commented 2 months ago

What happened?

Attempted to rename the access point to something different, no matter what I try the access point fails back to WLED_000000.

I'm using an Athom.tech with 0.13.0-b6 preinstalled.

To Reproduce Bug

Connect to the access point. Enter the WiFi setup page. Put in a new name for AP SSID. Save settings and reboot device.

Expected Behavior

Expected the new SSID I assigned to stay put. Oddly the password does save. It's just the SSID that won't.

Install Method

Binary from WLED.me

What version of WLED?

0.13.0-b6

Which microcontroller/board are you seeing the problem on?

ESP8266

Relevant log/trace output

No response

Anything else?

No response

Code of Conduct

softhack007 commented 2 months ago

Hi, athom have added their own code for naming the AP. The behaviour you describe is not happening with normal WLED. Please report the problem to athom - unfortunately the WLED core team cannot help you here.

In fact you could try to attach a serial-to-USB board and then flash your controller with a normal WLED firmware. However a few athom specific additions (IR remote, RF433) will not be available any more.

Attempted to rename the access point to something different, no matter what I try the access point fails back to WLED_000000.

I'm using an Athom.tech with 0.13.0-b6 preinstalled.

scarolan commented 2 months ago

Ah, thank you for clearing this up! I was going crazy here wondering what I did wrong.