McKlaud76
commented
2 weeks ago In my opinion you need to hook up signals as follows: RN1 of 128K+2 (grey)
- pin 2: red (R)
- pin 3: green (G)
- pin 4: blue (B)
- pin 11: Csync (SSI)
- pin 12: BRIGHT (I)
CPU clock you can take from the pin 6 of Z80 if needed.
But the most difficult part would be finding correct settings for the capture.
Hi, excelent project! However I can't find somewhere where the required signals are taken from, from the Spectrum (for example for 128K+2 gray that I have).