search

Alexbox364 / F_Interface_AL

You want to build your own DIY Fanatec base compatible Steering Wheel? You're at the right place :-)
30 stars 2 forks source link

BOM #12

Closed maximilianschulte closed 5 months ago

maximilianschulte commented 6 months ago

Could you make the BOM's (especially for ATMEGA328P_NO_HEADER) more specific. There are some parts that are not described, espacially the crystal oscillator and the capacitors. I'd also be interested in the 12 pin connector used as the fanatec connector. I'm quiet new to all that stuff, so sorry in advance if i missed anything.

Alexbox364 commented 6 months ago

Hi, to help you start, AliExpress kits for ATMEGA328p are a good base with included oscillator

https://a.aliexpress.com/_EJlHjkn

About the Fanatec connector you mean the QR pins of the 12x 2mm pitch pins on the PCB?

Le 30 avr. 2024 à 11:45, maximilianschulte @.***> a écrit :



Could you make the BOM's (especially for ATMEGA328P_NO_HEADER) more specific. There are some parts that are not described, espacially the crystal oscillator and the capacitors. I'd also be interested in the 12 pin connector used as the fanatec connector. I'm quiet new to all that stuff, so sorry in advance if i missed anything.

— Reply to this email directly, view it on GitHubhttps://github.com/Alexbox364/F_Interface_AL/issues/12, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AEB36DWFOAB2AKPULXQEEFTY75R2LAVCNFSM6AAAAABG75FNI2VHI2DSMVQWIX3LMV43ASLTON2WKOZSGI3TCMBQGQ4TEMI. You are receiving this because you are subscribed to this thread.Message ID: @.***>

maximilianschulte commented 6 months ago

No i mean the white connector comming from the ribbon cable. Thanks for the Atmega Kit, already ordered it.

Alexbox364 commented 6 months ago

Ok, it’s a classical 2mm pitch JST phr connector. You have the female coming from the base.

For the male part you have to solder on the PcB (2mm pitch pin) : https://a.aliexpress.com/_EJcDAJt You can find straight ones or elbowed ones depending on your need.

Le 30 avr. 2024 à 14:33, maximilianschulte @.***> a écrit :



No i mean the white connector comming from the ribbon cable. Thanks for the Atmega Kit, already ordered it.

— Reply to this email directly, view it on GitHubhttps://github.com/Alexbox364/F_Interface_AL/issues/12#issuecomment-2085209256, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AEB36DTGMJILS4WWT2KBLKTY76FRXAVCNFSM6AAAAABG75FNI2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOBVGIYDSMRVGY. You are receiving this because you commented.Message ID: @.***>

Krakane commented 5 months ago

Hi , i don't find the 4n7001 diod for full pro micro have you a link ?

Alexbox364 commented 5 months ago

Hi, sorry for late reply, there’s a mistake in item code, it’s 1N4001 diod

Alexbox364 commented 5 months ago

Its role is to have a voltage drop of the 5V to 3,7v on miso line