search

AlexxIT / SonoffLAN

Control Sonoff Devices with eWeLink (original) firmware over LAN and/or Cloud from Home Assistant
https://github.com/AlexxIT/Blog
MIT License
2.74k stars 416 forks source link

Issue with SNZB-06P Sensor Status Post-Update of SonoffLAN at v3.7.3 #1428

Closed Mike76Mer closed 4 months ago

Mike76Mer commented 5 months ago 
          Issue with SNZB-06P Sensor Status Post-Update of SonoffLAN at v3.7.3

@AlexxIT I’ve encountered a persistent issue where the status of my SNZB-06P sensors is no longer visible, although the RSSI remains accessible. This problem surfaced following the most recent update. Prior to this, the status of my three SNZB-06P sensors was displayed without any complications. It seems that the update may have inadvertently affected the sensor status visibility within the system.

I don't know if it can be useful, but the three devices are all associated with a ZBBridge-P

Originally posted by @atlaspl in https://github.com/AlexxIT/SonoffLAN/issues/1245#issuecomment-2134068446

Mike76Mer commented 5 months ago

Same problem here, I'm new to the community. Is there another report where I can get support?

This issue seems closed (#1245).

Thank you.

tinker-tillit-works commented 4 months ago

I have the same issue since upgrade to 3.7.3, my SNZB-06P now shows status of unknown. I needed to change the logic to use an Ewelink Scene since the status is not reported anymore.

cpmarexel2f commented 4 months ago

I have the same problem....Only RSSI SNZB-06P is available.

Screenshot 2024-07-11 153127

AlexxIT commented 4 months ago

1245 not closed yet