Home Assistant custom component for control Xiaomi Multimode Gateway (aka Gateway 3), Xiaomi Multimode Gateway 2, Aqara Hub E1 on default firmwares over LAN
Got some issues with pairing SSM-U02, the gateway finds the device and adds it to the HA but a few seconds after it is being removed. That's sad because I bought it only because it had been announced as supported.
I tested this behaviour in cn region and got the same results.
Found a similar issue #526 with another device but it doesn't help.
Adding using remote.send_command also didn't work out, so no clue how it could be solved.
Here is my environment:
Home Assistant: 2021.12.4
Gateway: ZNDMWG02LM Fw: 1.5.0_026
Integration: 1.6.5
Device: SSM-U02 (one channel no neutral relay)
Region: Russia
Notification about new device in HA:
did: lumi.54ef441000075989
mac: 54ef441000075989
model: lumi.switch.l0agl1
version: 22
zb_ver: 3.0
joined_type: 1
Hi everyone,
Got some issues with pairing SSM-U02, the gateway finds the device and adds it to the HA but a few seconds after it is being removed. That's sad because I bought it only because it had been announced as supported.
I tested this behaviour in cn region and got the same results. Found a similar issue #526 with another device but it doesn't help. Adding using remote.send_command also didn't work out, so no clue how it could be solved.
Here is my environment: Home Assistant: 2021.12.4 Gateway: ZNDMWG02LM Fw: 1.5.0_026 Integration: 1.6.5 Device: SSM-U02 (one channel no neutral relay) Region: Russia
Notification about new device in HA: did: lumi.54ef441000075989 mac: 54ef441000075989 model: lumi.switch.l0agl1 version: 22 zb_ver: 3.0 joined_type: 1
Here is my basic and mqtt log: