search

AlexxIT / XiaomiGateway3

Home Assistant custom component for control Xiaomi Multimode Gateway (aka Gateway 3), Xiaomi Multimode Gateway 2, Aqara Hub E1 on default firmwares over LAN
https://github.com/AlexxIT/Blog
MIT License
2.47k stars 346 forks source link

Zigbee channel change #823

Open colethegamer123 opened 2 years ago

colethegamer123 commented 2 years ago

Dear Alex!

I would like to know how to change zigbee channel on Gateway?

There should be a way to change that, on ZHA side I added the needed parameters like in the official HA documentation, but it says after you should re-create zigbee network so delete integration and reset device.

I tried first reset network with 10 second hold button and after factory reset with 10 click on button. Still its adding back my devices when I install integration and channel still default.

There has to be a solution because default zigbee channel mostly kills all wifi signal on 2.4Ghz, I cannot use anything only on 5Ghz. I tried to change everything from router side but does not help, the problem is the zigbee.

Thanks alot mate.

AlexxIT commented 2 years ago

You asking about MiHome mode?

diegocjorge commented 6 months ago

@AlexxIT I'm using this integration in MiHome mode and I would like to change the Zigbee channel. The gateway is using channel 25, just like my Z2M coordinator. Do you know how I could do that? Resetting the gateway to factory settings would pick a different channel?

AlexxIT commented 6 months ago

I don't remember right command for changing channel.