search

AlexxIT / go2rtc

Ultimate camera streaming application with support RTSP, RTMP, HTTP-FLV, WebRTC, MSE, HLS, MP4, MJPEG, HomeKit, FFmpeg, etc.
https://github.com/AlexxIT/Blog
MIT License
3.76k stars 304 forks source link

MSE from rtsp and bubble not working #1139

Open Menne01 opened 1 month ago

Menne01 commented 1 month ago

Hello, the following streams do not open: rtsp > rtsp://dxxx:xxxxxxxx7@192.168.XX.XXX:554/channel=0_stream=0&onvif=0.sdp?real_streamonvif=0.sdp?real_stream grafik bubble > bubble://dxxx:xxxxxxxx7@192.168.XX.XXX:34567/bubble/live?ch=0&stream=0 grafik Only one works with ffmpeg, but slowly with freezer ffmpeg:rtsp://dxxx:xxxxxxxx7@192.168.XX.XXX:554/cam/realmonitor?channel=0&subtype=0#video=h264#hardware=v4l2m2m grafik grafik This is a high-resolution stream? Cam settings: grafik grafik Other settings are not possible Everything is installed on a Raspberry Pi 4. Nothing else runs in the background.

Regards Dirk

AlexxIT commented 1 month ago

Just network (i/o timeout) or camera firmware issues (broken picture). Not related to go2rtc.

Menne01 commented 1 month ago

This is a Live Stream Pictures. grafik Shinobi and Motioneye open the rtsp Streams But the system is overwhelmed with 3 cams I don't see any errors in mine. All WiFi cams are connected to an RSSI with less than -60 dBm.

AlexxIT commented 1 month ago

Your live view work via another protocol. RSSI not representative. i/o timeout and broken frames are pretty clear errors.