Closed llll2222 closed 1 year ago
Are you sure that firmware file is the correct one for the dalrc rocket? It sounds like the wrong target is flashed. Can you connect with the config tool? If you can't try the pb4 bootloader.
thanks for you reply. I not sure that firmware for this esc board . this dalrc Rocket 50A esc board scheme use stm32f051k6u6 and fd62288. yes I flash bootloder pb4,so esc config tool can connect to esc .But start music cycle replay. ![Uploading 492C0698-E52F-4B5F-89F5-6C5D37A19794.jpeg…]()
Yes the firmware name AM32_FD6288 is for the input pin pa2. Your ESC uses the input pin pb4 . I would try the iflight 50a firmware and if that doesn't work maybe the diatone firmware.
@llll2222 i'm going to close this issue. The fd6288 firmware is not the correct one for your board and its not in the supported hardware list. Please join the Discord or slack if you need help trying to find the correct one.
dear friend, dalrc rocket 50a esc flash firmware fd6288-1.93 bootloder pa2 V11.bin all stm32 mcu restart music cycle can't control motor.