ggtux
commented
3 years ago !/bin/bash
Choose between ZWO or RPiHQ or auto (prefers ZWO if present)
CAMERA="ZWO"
Set to true to upload current image to your website
UPLOAD_IMG=true
Set to true to upload timelapse video to your website at the end of each night
UPLOAD_VIDEO=true
Set to true to send data to your server at the end of each night
POST_END_OF_NIGHT_DATA=true
Set to true to generate a timelapse at the end of the night
TIMELAPSE=true
Set the width and height parameter for timelapse generation (sizes must be divisible by 2)
TIMELAPSEWIDTH=1280 TIMELAPSEHEIGHT=1024
Timelapse frame rate (number of frames per second)
FPS=17
Set to true to generate a keogram at the end of the night (image summary of the night)
KEOGRAM=true
Set to true to upload the keogram after it has been generated
UPLOAD_KEOGRAM=true
Set to true to generate a startrails image of the night. Will skip brighter images to avoid over-exposure
STARTRAILS=true
Images with a brightness higher than the threshold will be skipped for startrails image generation
BRIGHTNESS_THRESHOLD=0.1
Set to true to upload the startrails after it has been generated
UPLOAD_STARTRAILS=true
Set to true to enable automatic deletion of archived data (images + videos)
AUTO_DELETE=true
Set this value to the number of archived nights you want to keep. Needs AUTO_DELETE=true to work
NIGHTS_TO_KEEP=7
Set to true if you want to enable dark frame subtraction on your night time images
DARK_FRAME_SUBTRACTION=false
Set to 0 to disable Daytime Capture
DAYTIME="1"
Set 24Hr capture to true to save both night and day images to disk. By default, only night images are saved.
CAPTURE_24HR=false
Resize images before cropping and saving. Adjust width and height according to your own sensor ratio
IMG_RESIZE=false IMG_HEIGHT=1304 IMG_WIDTH=976
Crop the captured image, used to improve the images when using a fisheye lens
CROP_IMAGE=false CROP_WIDTH=640 CROP_HEIGHT=480 CROP_OFFSET_X=0 CROP_OFFSET_Y=0
Auto stretch images saved at night
AUTO_STRETCH=false AUTO_STRETCH_AMOUNT=10 AUTO_STRETCH_MID_POINT=10%
Path to the camera settings (exposure, gain, delay, overlay, etc)
CAMERA_SETTINGS_DIR="/etc/raspap"
if [[ $CAMERA -eq "auto" ]]; then
restore currently saved autodiscovered camera mode if any
source "$ALLSKY_HOME/autocam.sh" fi CAMERA_SETTINGS="$CAMERA_SETTINGSDIR/settings$CAMERA.json"
Hi,
I can not get a picture from the ASI224MC. It worked before with 0.6.
I checked the camera, is ok. I have enough 5V power and so on. I belief I did all the configuration right, but you never know.
Maybe you can give me a hint?
Thank you
Gunter