search

AmiBlitz / AmiBlitz3

Complete package of AmiBlitz3 including all sources.
https://www.amiblitz.de/
123 stars 9 forks source link

IDE Unusable in non interlaced modes #8

Closed sacredbanana closed 4 years ago

sacredbanana commented 4 years ago

I switched to non interlaced PAL mode since interlacing on my 1084S monitor is awful to look at and now some of the GUI buttons are off the screen and hence unusable, this includes the confirmation buttons in the pref screen so I am unable to switch back into interlaced mode to see the entire GUI again so its unusable. Are we able to make all the UI elements fit on the lower vertical resolution modes or at least prevent the user from using such a mode to begin with so they don't end up getting stuck like I am?

honitos commented 4 years ago

That is correct but it is very hard to make that requirement possible with a complex IDE and just having 200/256 lines. I am going to add some kind of restriction in screen height selection below 480pixels...

honitos commented 4 years ago

Resolved with V3.7.4