search

Amulet-Team / Amulet-Map-Editor

A new Minecraft world editor and converter that supports all versions since Java 1.12 and Bedrock 1.7.
https://www.amuletmc.com/
1.78k stars 123 forks source link

[Bug Report] Issue installing on Raspberry pi 4 #1001

Closed Beijing-corn87 closed 1 year ago

Beijing-corn87 commented 1 year ago

Bug Report

Hi, I was trying to install Amulet on my Pi and I was expecting to it not work here we get to a point where it can't install wxPython. It is probably just an ARM processor not understanding instructions or something else. Also, I ran this in a Python virtual environment Log from where it started:

` Running setup.py install for wxPython ... error error: subprocess-exited-with-error

× Running setup.py install for wxPython did not run successfully. │ exit code: 1 ╰─> [134 lines of output] running install /home/pi/amulet-editor/lib/python3.11/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools. warnings.warn( running build WARNING: Building this way assumes that all generated files have been generated already. If that is not the case then use build.py directly to generate the source and perform the build stage. You can use --skip-build with the bdist_* or install commands to avoid this message and the wxWidgets and Phoenix build steps in the future.

  "/home/pi/amulet-editor/bin/python" -u build.py build
  Will build using: "/home/pi/amulet-editor/bin/python"
  3.11.2 (main, Mar 13 2023, 12:18:29) [GCC 12.2.0]
  Python's architecture is 64bit
  cfg.VERSION: 4.2.1

  Running command: build
  Running command: build_wx
  wxWidgets build options: ['--wxpython', '--unicode', '--gtk3']
  Configure options: ['--enable-unicode', '--with-gtk=3', '--enable-sound', '--enable-graphics_ctx', '--enable-display', '--enable-geometry', '--enable-debug_flag', '--enable-optimise', '--disable-debugreport', '--enable-uiactionsim', '--enable-autoidman', '--with-sdl']
  /tmp/pip-install-o28qoip8/wxpython_27580197e06e45b98956ab4b9b5b5f31/ext/wxWidgets/configure --enable-unicode --with-gtk=3 --enable-sound --enable-graphics_ctx --enable-display --enable-geometry --enable-debug_flag --enable-optimise --disable-debugreport --enable-uiactionsim --enable-autoidman --with-sdl
  checking build system type... aarch64-unknown-linux-gnu
  checking host system type... aarch64-unknown-linux-gnu
  checking for toolkit... gtk
  checking for gcc... gcc
  checking whether the C compiler works... yes
  checking for C compiler default output file name... a.out
  checking for suffix of executables...
  checking whether we are cross compiling... no
  checking for suffix of object files... o
  checking whether we are using the GNU C compiler... yes
  checking whether gcc accepts -g... yes
  checking for gcc option to accept ISO C89... none needed
  checking whether we are using the Intel C compiler... no
  checking how to run the C preprocessor... gcc -E
  checking for grep that handles long lines and -e... /usr/bin/grep
  checking for egrep... /usr/bin/grep -E
  checking whether gcc needs -traditional... no
  checking for g++... g++
  checking whether we are using the GNU C++ compiler... yes
  checking whether g++ accepts -g... yes
  checking whether we are using the Intel C++ compiler... no
  checking whether we are using the Sun C++ compiler... no
  checking for ar... ar
  checking for ANSI C header files... yes
  checking for sys/types.h... yes
  checking for sys/stat.h... yes
  checking for stdlib.h... yes
  checking for string.h... yes
  checking for memory.h... yes
  checking for strings.h... yes
  checking for inttypes.h... yes
  checking for stdint.h... yes
  checking for unistd.h... yes
  checking for langinfo.h... yes
  checking for wchar.h... yes
  checking for sys/select.h... yes
  checking for cxxabi.h... yes
  checking for an ANSI C-conforming const... yes
  checking for inline... inline
  checking size of short... 2
  checking size of void *... 8
  checking size of int... 4
  checking size of long... 8
  checking size of size_t... 8
  checking size of long long... 8
  checking size of wchar_t... 4
  checking for va_copy... yes
  checking for _FILE_OFFSET_BITS value needed for large files... 64
  checking if large file support is available... yes
  checking for _LARGEFILE_SOURCE value needed for large files... no
  checking whether byte ordering is bigendian... no
  checking for std::wstring in <string>... yes
  checking for std::istream... yes
  checking for std::ostream... yes
  checking for type_traits... yes
  checking for __sync_xxx_and_fetch builtins... yes
  checking for libraries directories... /usr/lib/aarch64-linux-gnu /usr/lib
  checking for cos... no
  checking for floor... no
  checking if floating point functions link without -lm... no
  checking for sin... yes
  checking for ceil... yes
  checking if floating point functions link with -lm... yes
  checking for strtoull... yes
  checking for pkg-config... /usr/bin/pkg-config
  checking pkg-config is at least version 0.9.0... yes
  checking for LIBPCRE... checking whether pcre submodule exists... yes
  checking for zlib.h >= 1.1.4... yes
  checking for zlib.h... (cached) yes
  checking for deflate in -lz... yes
  checking for png.h > 0.90... yes
  checking for png.h... (cached) yes
  checking for png_sig_cmp in -lpng... yes
  checking for jpeglib.h... no
  configure: WARNING: system jpeg library not found, will use built-in instead
  checking whether jpeglib.h file exists... yes
  checking for jbg_dec_init in -ljbig... no
  checking for LIBTIFF... not found via pkg-config
  checking for tiffio.h... no
  configure: WARNING: system tiff library not found, will use built-in instead
  checking whether tiff.h file exists... yes
  checking for expat.h... yes
  checking if expat.h is valid C++ header... yes
  checking for XML_ParserCreate in -lexpat... yes
  checking for LIBCURL... not found
  checking for GTK+ version...
  checking for pkg-config... (cached) /usr/bin/pkg-config
  checking pkg-config is at least version 0.16... yes
  checking for GTK+ - version >= 3.0.0... no
  *** Could not run GTK+ test program, checking why...
  *** The test program failed to compile or link. See the file config.log for the
  *** exact error that occurred. This usually means GTK+ is incorrectly installed.
  configure: error:
  The development files for GTK+ were not found. For GTK+ 2, please
  ensure that pkg-config is in the path and that gtk+-2.0.pc is
  installed. For GTK+ 1.2 please check that gtk-config is in the path,
  and that the version is 1.2.3 or above. Also check that the
  libraries returned by 'pkg-config gtk+-2.0 --libs' or 'gtk-config
  --libs' are in the LD_LIBRARY_PATH or equivalent.

  Error running configure
  ERROR: failed building wxWidgets
  Traceback (most recent call last):
    File "/tmp/pip-install-o28qoip8/wxpython_27580197e06e45b98956ab4b9b5b5f31/build.py", line 1563, in cmd_build_wx
      wxbuild.main(wxDir(), build_options)
    File "/tmp/pip-install-o28qoip8/wxpython_27580197e06e45b98956ab4b9b5b5f31/buildtools/build_wxwidgets.py", line 379, in main
      exitIfError(wxBuilder.configure(dir=wxRootDir, options=configure_opts),
    File "/tmp/pip-install-o28qoip8/wxpython_27580197e06e45b98956ab4b9b5b5f31/buildtools/build_wxwidgets.py", line 72, in exitIfError
      raise builder.BuildError(msg)
  buildtools.builder.BuildError: Error running configure
  Finished command: build_wx (0m15.314s)
  Finished command: build (0m15.314s)
  Command '"/home/pi/amulet-editor/bin/python" -u build.py build' failed with exit code 1.
  [end of output]

note: This error originates from a subprocess, and is likely not a problem with pip. error: legacy-install-failure

× Encountered error while trying to install package. ╰─> wxPython

note: This is an issue with the package mentioned above, not pip. hint: See above for output from the failure.`

Environment:

gentlegiantJGC commented 1 year ago

wxPython is a third party library that is not maintained by us. Google may have a solution for you.