Describe the bug
I noticed the following:
I filled in all the fields from top to bottom in order (according to my wishes) and finally copied in my normal Start & End G-Code!
So far everything worked.
But if you then change the hotend or bed temperature "afterwards", for example, this will not be written into the current G-code.
Only when you click once in the Start G-Code field are the values updated accordingly in the preview and thus also in the G-Code!
Klipper Error Message (if applicable)
no klipper - Prusa MK3S with Stock Marlin
i noticed this yesterday. you should be able to get the gcode field to update against the temp inputs if you check and uncheck the Heating Codes box. indeed it feels like a bug. but this is the temporary solution
Describe the bug I noticed the following: I filled in all the fields from top to bottom in order (according to my wishes) and finally copied in my normal Start & End G-Code! So far everything worked. But if you then change the hotend or bed temperature "afterwards", for example, this will not be written into the current G-code. Only when you click once in the Start G-Code field are the values updated accordingly in the preview and thus also in the G-Code!
Klipper Error Message (if applicable) no klipper - Prusa MK3S with Stock Marlin
G-code File pa_pattern.gcode.txt
Screenshots Gcode says 240C Hotend Temp, but i entered 250C for example![grafik](https://user-images.githubusercontent.com/12835450/218554392-7e21d622-c682-4377-a2de-4789c866391e.png)
Hope you could unterstand what i mean, because my english skills are terrible, so i used Google Translate as support =)
Kindly Regards from Upper Austria Mark