Setting Layer Count to any value doesn't do anything, always prints four layers.
Even in the generated GCODE file there is
; Print Settings:
; - Line Width: 112.5 %
; - Layer Count: 4
; - Layer Height: 0.2 mm
; - Print Speed: 50 mm/s
; - Acceleration: Disabled
; - Fan Speed: 0%
Even if I set it to 1
Setting Layer Count to any value doesn't do anything, always prints four layers. Even in the generated GCODE file there is ; Print Settings: ; - Line Width: 112.5 % ; - Layer Count: 4 ; - Layer Height: 0.2 mm ; - Print Speed: 50 mm/s ; - Acceleration: Disabled ; - Fan Speed: 0% Even if I set it to 1