Scanner unable to validate (almost) all of my artifacts

[Paws26]

I was using 1280x720 Windowed as suggested and the scanner was only able to validate 15 out of 328 artifacts. I've also tried different Scan Delay settings with no difference.

[Andrewthe13th]

Have you tried restarting genshin at the same resolution? There are known issues with resizing the window that messes up the UI a bit.

[Paws26]

I have done that just now, closed and opened Genshin at 1280x720 but It had the same result. It's weird that it only works for a very few artifacts.

Edit: The 1.0V of the Scanner seems to work and scan every artifact correctly, the 1.1V fails to do so for me. Edit 2: 1.0V Scanner scans the artifacts correctly but does not output any GOOD/json file on completion (even with an available and determined folder selected), instead it just closes itself.

[Cupcak3]

You're right that it is strange that it can scan some artifacts but not nearly a significant percent. I will have to write some better error output to be able to tell exactly what's causing the validation to fail.

[Ame55]

Hi i have the same problem and on Genshin Optimizer i have only artefact with only FLAT sub stat, none of them have a percent stat. I don't know if it help.

Edit: I used 1280x720 Windowed

[Cupcak3]

@Ame55 this seems to be a different issue. Please open a new issue. Additionally if you can provide a screenshot of at least one of the artifacts in-game that should have % substats and how it appears in GO it would be much appreciated.

[Dranixx]

I do think it's the same issue, I also get Unable to validate information for artifact #329 for every artifacts that have a % substats. As you can see here only artifacts with FLAT subs get scanned.

During the scan it didn't show anything in the output artifacts windows, so don't know what causing the validation to fail.

[Ame55]

Sorry, I misspoke, I meant that like Paws26, and now Dranixx, only a small part of my artifacts were scanned. The Error Unable to validate information for artifact #

And that after transferring the data to GO, I noticed that the scanned artifacts only had flat substat.

I apologize for not having correctly explained the problem previously.

[reloxx13]

same here, worked fine with 1.0. since 1.1 substats are missing

[tolukolvi]

I managed to get all scanned after pulling the development version from git, building it with Visual Studio and then replacing v1.1 version files with the newly built files. However, I can't import anything to seelie.me even thou the json-file has all the data in it.

[Cupcak3]

Hi there, this issue is hopefully resolved in the v1.1.1 prerelease. If it has been, please let us know so we can close this issue.

@tolukolvi : There are two places you can import to seelie.me, one in the Inventory panel and one in the Settings panel. I believe you need to use the Inventory panel's import button and use the GOOD option.

[Ame55]

@Cupcak3 I just tested a new version, everything seems to be working normally, if I find something I will let you know.

Thank you for everything.

[Cupcak3]

I am going to close this issue as one user has reported it being fixed and the other users in the thread have not replied in a while. Please feel free to reopen this issue or to open a new issue should any problems come up.