Andrik45719 / MJSXJ03HL

Non-invasive flashing of Xiaomi Mi Camera 2K Magnetic Mount MJSXJ03HL
4 stars 0 forks source link

The camera turned into a brick at the first stage of reflashing #1

Open artmaluk opened 1 day ago

artmaluk commented 1 day ago

At the time of reflashing, I performed the U-Boot update item. I got it right, and the yellow LED. But after turning it off and on, the camera no longer showed signs of life. The file was not written to the flash drive either. What should I do?

Andrik45719 commented 23 hours ago
  1. Press reset button and power on camera If LED is White then U-boot remain old.
  2. Try to use another sd-card and retry installation process.
artmaluk commented 8 hours ago
  1. Press reset button and power on camera If LED is White then U-boot remain old.
  2. Try to use another sd-card and retry installation process.

I tried it. The LED doesn't light at all. It's a brick.

Andrik45719 commented 8 hours ago

Plug camera into PC using usb-c data cable and check if camera detected by OS. This may take up to 30 seconds. If camera detected it can be reflashed via USB otherwise only disassembly will help.

Andrik45719 commented 7 hours ago

Cameras cable not have data wires only power and cannot be used to reflash via USB