search

Andrik45719 / ZY-M100

ZY-M100/WZ-M100 solving network spamming
49 stars 0 forks source link

Tuya TS0601 #9

Open Mathea90 opened 1 month ago

Mathea90 commented 1 month ago

Hello, I have two similar presence sensors which have the same problem and a slightly different model name: "_TZE200_ztc6ggyl" / "TS0601". Do you think it's possible to flash the hardware with the "TZE204_ztc6ggyl" firmware or is the firmware very hardware-specific?

Thank you very much for the alternative firmware, by the way. It saved my Zigbee network!

joopdo commented 1 month ago

Hey, are you looking at 'Zigbee Model' or to 'Model'? Screenshot from 2024-10-09 19-44-10

Andrik45719 commented 1 month ago

Hello, I have two similar presence sensors which have the same problem and a slightly different model name: "_TZE200_ztc6ggyl" / "TS0601". Do you think it's possible to flash the hardware with the "TZE204_ztc6ggyl" firmware or is the firmware very hardware-specific?

Thank you very much for the alternative firmware, by the way. It saved my Zigbee network!

_TZE200 and _TZE204 is zigbee radio module modification. ztc6ggyl is microvawe product id

Yes you can flash _TZE200_ztc6ggyl using _TZE204_ztc6ggyl dump Z2M support both variants {modelID: 'TS0601', manufacturerName: '_TZE204_ztc6ggyl'}, {modelID: 'TS0601', manufacturerName: '_TZE200_ztc6ggyl'},

Mathea90 commented 1 month ago

Thanks for the information! I flashed the device and it works like a charm.

I realized that one of my sensors has the manufacturer name '_TZE200_holel4dk' (also modelID 'TS0601'). So if I understand correctly it is equipped with a different microwave chip. Since you have different firmwares with various microwave module names, will my sensor most likely work with one of the firmwares?

Thank you!