search

AngelLM / Thor

DIY 3D Printable Robotic Arm
Creative Commons Attribution Share Alike 4.0 International
953 stars 223 forks source link

Looking for a Print Inventory List, and unit scaling on STLfiles. #72

Closed AlexanderPeters closed 3 years ago

AlexanderPeters commented 6 years ago

Hi, could you please let me know where I can find a Bill Of Materials that includes the quantity of each number of 3D printed component that need to be printed. Additionally can you please let me know if the .stl files are scales in in, mm, or cm.

-Thanks

AngelLM commented 5 years ago

Hi @AlexanderPeters ,

Currently there is not a BOM including the quantity of printed pieces. I'll do it soon. Meanwhile you can download the FreeCAD assembly file and check it. The unit used on the STL files, and every 3D file in this repository is mm.

Thank you for your suggestion!

AlexanderPeters commented 5 years ago

Thanks

On Thu, Feb 7, 2019, 17:07 AngelLM <notifications@github.com wrote:

Hi @AlexanderPeters https://github.com/AlexanderPeters ,

Currently there is not a BOM including the quantity of printed pieces. I'll do it soon. Meanwhile you can download the FreeCAD assembly file and check it. The unit used on the STL files, and every 3D file in this repository is mm.

Thank you for your suggestion!

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/AngelLM/Thor/issues/72#issuecomment-461610878, or mute the thread https://github.com/notifications/unsubscribe-auth/AKZK-4cO0-TPFmic_Qrf1zF9mcogvv_dks5vLKOMgaJpZM4XLI8j .

AngelLM commented 3 years ago

In the new Thor's website I've added a 3D Printing Guide with the ammount of pieces needed of each model and the recommended settings to print them all.