Open Forge411 opened 1 year ago
did you follow this steps before flashing it? https://github.com/Anime4000/RTL960x/tree/main/Firmware/TWCGPON657#using-v2801f-on-twcgpon657
Yes of course! Before the firmware, I did this!
Before flashing the V2801F firmware, you need to do it via telnet first
installing LAN_SDS_MODE 1 flash installing the flash PON_MODE 3
The stick is stitched! It rebooted and didn't turn on anymore! I couldn't do any more according to your instructions!
I couldn 't do these items anymore !
Once the firmware update is complete, do this to prevent a reboot with the wrong key.:
ELAN_MAC_ADDR 6CEFC6000000 Flash Memory Set
HW_HWVER RTL960X flash Memory Kit VS_AUTH_KEY 00CF646955CCBDB88AB3B68922DB810F flash Memory Kit Set PON_MODE back to 1 GPON or 2 EPON
unfortunate, way to fix this is via UART ðĒ
Will this do ?
Need to help restore it ðĨē please ððð
yes that should do just fine, you might just switch the boot partition back to original, I suggest that you just buy ODI stick instead
The stick costs 85$ and the UART is 7$ ððð
yea, it's good to have UART tool, you can login many embedded system
Don 't you have the original eeprom for the stick ?
Don 't you have the original eeprom for the stick ?
unfortunately I dont, my best guess it just boot normally and boa is crashed perhaps, you just swap boot partition and reflash again
When you don't understand it, it's very difficult ðŦĢ
well, that's the experience I been though since 2020, when world in lock down, much free time, I have broke many PON Stick just to make this guide ðĪĢ
even blown the PON Laser ðĪĢ
I recommend you get the ODI PON Stick instead, it has stable firmware between full bridge and HGU mode
I am sorry about your stick, I haven touch RTL9601CI long time after found RTL9601D Sticks
ððð thank you very much for the answers ! Most likely I will order an ODI ! The experience is worth the money !
I try buy TWCGPON657 at taobao again and make full SPI Flash dump between original and V2801F based
but, my gut tell me, you can fix it via UART ð
if micro solder is hard for you, ODI Stick is ð
It 's not hard to solder ! UART has someone to do ! But it is difficult to get the original dump files!
there is .bin from b13 ?
I downloaded a file from eeprom . But there 's a format .bin . You have firmware in this format ?
I downloaded a file from eeprom . But there 's a format .bin . You have firmware in this format ?
Maybe this will help, dump from working stick. C00R657V2801F_V1.9.0-220404.bin
I downloaded a file from eeprom . But there 's a format .bin . You have firmware in this format ?
Maybe this will help, dump from working stick. C00R657V2801F_V1.9.0-220404.bin
Thanks ! Flashed the eeprom. The stick 's indicator started to glow ! It has not been possible to enter the settings panel yet! The standard ip for logging in is 192.168.1.1 ?
Thanks ! Flashed the eeprom. The stick 's indicator started to glow ! It has not been possible to enter the settings panel yet! The standard ip for logging in is 192.168.1.1 ?
The ip for loggin is 192.168.255.2 telnet to stick with this account user: user pass: user
flash all
to find admin password
Thanks ! Flashed the eeprom. The stick 's indicator started to glow ! It has not been possible to enter the settings panel yet! The standard ip for logging in is 192.168.1.1 ?
The ip for loggin is 192.168.255.2 telnet to stick with this account user: user pass: user
flash all
to find admin password
Thank you very much! ð Tomorrow I 'll try to log in to the stick by ip !
Thanks ! Flashed the eeprom. The stick 's indicator started to glow ! It has not been possible to enter the settings panel yet! The standard ip for logging in is 192.168.1.1 ?
The ip for loggin is 192.168.255.2 telnet to stick with this account user: user pass: user
flash all
to find admin password
The stick is working ! Thank you very much ðĪŠ login: admin password: admin
I try buy TWCGPON657 at taobao again and make full SPI Flash dump between original and V2801F based
but, my gut tell me, you can fix it via UART ð
if micro solder is hard for you, ODI Stick is ð
Maybe dump fail eeproma should be saved for other users ? There is also an IP login and password from dump full.
Hi ! Please tell me ! After flashing TWCGPON657 to C00R657V2801F_V1.9.0-220404.tar, the stick stopped turning on! What could I have done wrong ? And how can this be fixed ?