VSOL 2802RH bridge giving wrong ip after boot - Githubissues

Anime4000 / RTL960x

Hacking RTL960x based xPON ONU Stick to suite your Universal OLT

The Unlicense

652 stars 110 forks source link

VSOL 2802RH bridge giving wrong ip after boot #210

Open Faruolo2 opened 11 months ago

Faruolo2 commented 11 months ago

Hello guys, i hope any1 can help me with this issue

the problem is relatively simple, i could clone my ONT with success on VSOL 2802RH but everytime it boot up, the ip that is provided via Ipv4 is something in the range of 10.XXX.XX.X.

I know that this private ip is related to vlan 220 that is responsable to VOIP.

im current using a openwrt router, so i just have to restart Wan interface and the right internet ip in the range of 172.XXX.X.XX or 220.XXX.X.XX is provided, and sucessive restarts after that always return a internet ip.

The only anoying issue is that everytime VSOL reboots i have to restart WAN. is there any config in VSOL that could exclude that 10.XXX.X.XX ip from pass trough bridge?

OBS: i tried setup some scripts on openwrt to exclude that voip ip but none have worked

d5aqoep commented 11 months ago

In WAN, you can use VLAN 220 and assign to a different LAN port.