search

Anime4000 / RTL960x

Hacking V2801F, TWCGPON657 & DFP-34X-2C2 GPON ONU SFP Stick to suite your ISP Fiber
The Unlicense
556 stars 96 forks source link

DFP-34X-2C2 ONU State O5 rebooting #233

Open StreII opened 6 months ago

StreII commented 6 months ago

https://disk.yandex.ru/i/D0PR5AEjhgciZw video of the setup and defect. What could be the reason? and so with any firmware with the status 05, it reboots and does not get into the settings anymore until you pull out the optics.

Anime4000 commented 6 months ago

what Router/Switch do you use that run the ODI stick?

StreII commented 6 months ago

Keenetic Peak (KN-2710) , GR-1000-AS-SFP

StreII commented 6 months ago

there is an opinion that it is rebooting because of TR-069. is there a function to disable the reboot after receiving the parameters from TR-069?

Anime4000 commented 6 months ago

ODI doesn't have TR-069

Anime4000 commented 6 months ago

if you from RU, try join the telegram here https://t.me/xpon_sfp_onu they know what to do with RU ISP's

cuibapvh commented 6 months ago

https://disk.yandex.ru/i/D0PR5AEjhgciZw video of the setup and defect. What could be the reason? and so with any firmware with the status 05, it reboots and does not get into the settings anymore until you pull out the optics.

some ISPs try to upgrade the firmware via OMCI, the module doesn't understand what it is and causes 100% cpu then the modules freeze, check the latest firmware version from stock ONT and copy it into new module I'm from Vietnam and my ISP can do it, my ISP updates their ONT regularly so I had to repack the original firmware of the module to get it working, without having to manually edit the new software version (this is quite annoying).

StreII commented 6 months ago

#

https://disk.yandex.ru/i/D0PR5AEjhgciZw video of the setup and defect. What could be the reason? and so with any firmware with the status 05, it reboots and does not get into the settings anymore until you pull out the optics.

some ISPs try to upgrade the firmware via OMCI, the module doesn't understand what it is and causes 100% cpu then the modules freeze, check the latest firmware version from stock ONT and copy it into new module I'm from Vietnam and my ISP can do it, my ISP updates their ONT regularly so I had to repack the original firmware of the module to get it working, without having to manually edit the new software version (this is quite annoying).

Do you also have ODI Realtek DFP-34X-2C2?

Anime4000 commented 1 month ago

try flash this firmware M110_sfp_ODI_240408_rel240513+hwtc-fix.zip

then edit OMCI including mac address, and leave MAC Key, it auto generate

hope not cause invalid mac key