search

Anonymousdog / displaycameras

System for displaying RTSP feeds from IP cameras on the Raspberry Pi
Apache License 2.0
572 stars 114 forks source link

Simple full-screen alternate between 2 cams? #95

Closed K4KDR closed 3 years ago

K4KDR commented 3 years ago

Thanks for the great utility! This is going to be a life-saver for me.

I'm embarrassed to say that I have not been able to figure out how to properly setup the layout.conf.default file to simply rotate between 2 cameras, showing them full-screen but only one at a time.

The first camera displays properly but it seems no matter what I try, after 5 seconds the second camera just flashes on top of the first. After another 5 seconds the original image displays properly.

I know that it's going to seem simple once I understand the syntax how each "Window Position" line should be done, but I've not found the right combination yet.

Thanks much in advance if you could please point me in the right direction on how to set that up.

Best regards,

-Scott

K4KDR commented 3 years ago

Very sorry - had not seen the /example_layouts folder.

One of those addresses my need - thanks again for the great project!!

-Scott

Anonymousdog commented 3 years ago

No worries. Sorry for the late reply.

Andy

On Fri, Feb 26, 2021 at 1:59 AM K4KDR notifications@github.com wrote:

Very sorry - had not seen the /example_layouts folder.

One of those addresses my need - thanks again for the great project!!

-Scott

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Anonymousdog/displaycameras/issues/95#issuecomment-786454319, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHIYIKMRANAV6M3SEH37YT3TA5BFFANCNFSM4YH2VEIA .