"Failed to init sd card!"; Apparently a problem with SD card 512gb Samsung Evo Plus

[mxarment]

I've seen this problem in the Hekate github and I'm reasking here in case someone know what's happening.

This is the post Im talking about: https://github.com/CTCaer/hekate/issues/899

And this my response having the same problem in that post:

Having the same problem on a friends switch OLED with the picofly,

Ive tried installing the HATS pack in the card in case some corrupted file but it always show the error "failed to init sd card" Also, trying that same pack on another SD card (a sandisk one) works perfectly.

I dont know what could it be but it happened from one day to another without an apparent reason, and what is more curious, I personally have a switch lite with the same chip and the exact same card bought on the same place, and it still works for me.

I dont know if it could be a manufacturing error but makes no sense because the PC can read the card and its files perfectly.

I would appreciate any ideas in case someone has some clue about what can be happening

(Attached photos, one from my lite with the card info and the other from the oled displaying the error)

[gataka85]

Good day, i want to confirm - i too have problems with Samsung Evo Plus cards, several cards and picofy.

A few day ago i had a problem with 512 GB card on OLED - sometimes it worked, some times it didn't. When i went in Console Info and microSD Card Infor. There wee 3 errors in Init Fails : 3.

The card was working fine before the mod on the console. I have tested the card with h2testw.exe - all was fine.

Today i have again same problem with the same brand Samsung Evo Plus 256GB card on OLED - its working just fine in original operation system. But when start the console with hekate - one time it run hekate, the next it give error the card could not be mounted.

Today i intalled another 256GB Evo Plus on V2 console with picofly modchip - working flawlessly