Last update 2.72 does not update

[curcius]

I can't do the update by picofly payload it says it loaded the update.bin but when I restart the switch it restarts in ofw and the chip is flashing white, I restart and it gives the glich but it continues in the previous version in case 2.67. How should I do to update? only by usb?

Video

[Ansem-SoD]

This might be silly but did you use the latest update.bin?

[drty2k]

i have same problem, try many times - after power off it booting ofw, after next reboot glitch work fine but firmware stay same = 2.67

[ilorenzom]

same here. update from 2.67 to 2.72 skHynix emmc. latest update.bin on root seems to update but after restart boots to OFW. version stays the same

[curcius]

i have same problem, try many times - after power off it booting ofw, after next reboot glitch work fine but firmware stay same = 2.67

Yes I downloaded the latest update.bin

[drty2k]

get update.bin from this place and all work fine) https://gbatemp.net/threads/picofly-a-hwfly-switch-modchip.622701/page-78#post-10090767

[mistervampi]

~~Same here!! Even with GBATemp BIN V2 with Kioxia (Toshiba) NAND~~

Edit: I've updated with latest BIN and now works fine

[curcius]

get update.bin from this place and all work fine) https://gbatemp.net/threads/picofly-a-hwfly-switch-modchip.622701/page-78#post-10090767

I did the gbatemp procedure and it worked but I did two more steps to make it work

Steps on picofly toolbox and hekate

-show firmware information

• update firmware from SD card (place update.bin into the root folder)
• rollback to the backup firmware slot
• reset learning statistics
• dump / write sdloader
• back to hekate
• shutdown the consol for the hekate
• and 2.72 updated

😃#7

[curcius]

get update.bin from this place and all work fine) https://gbatemp.net/threads/picofly-a-hwfly-switch-modchip.622701/page-78#post-10090767

Thank you so much

[curcius]

Solved