Closed 0jay closed 5 years ago
GUI Version [ 8.8.71 ]
remove connection
Red status and Internet, green ethernet.
Reconnect - all off except status green.
NICE! renable connection what happen ?
You're probably not seeing my edits.
ok good so it looks like it's working good...
do this logread -f and press the status button.. something should appear in the console if not try press the wps button
it should say the button pressed
(we need to fix the button not working and the statusled trigger that i don't know why it doesn't work)
There are only two buttons in that panel: Status - left hand side, Wifi(?) - right hand side.
root@mygateway:~# logread -f
Sat Oct 13 07:24:20 2018 daemon.notice [24610]: [mobiled] (WaitingForDevice) runs WaitingForDevice-Main.check(timeout, 1)
Sat Oct 13 07:24:32 2018 user.notice [Buttons]: pressed BTN_3
Sat Oct 13 07:24:32 2018 user.notice [Buttons]: released BTN_3
Sat Oct 13 07:25:21 2018 daemon.notice [24610]: [mobiled] (WaitingForDevice) runs WaitingForDevice-Main.check(timeout, 1)
Sat Oct 13 07:26:00 2018 cron.info crond[3568]: USER root pid 30474 cmd /sbin/trafficmon.lua
Sat Oct 13 07:26:21 2018 daemon.notice [24610]: [mobiled] (WaitingForDevice) runs WaitingForDevice-Main.check(timeout, 1)
Sat Oct 13 07:27:22 2018 daemon.notice [24610]: [mobiled] (WaitingForDevice) runs WaitingForDevice-Main.check(timeout, 1)
Sat Oct 13 07:27:51 2018 user.notice [Buttons]: pressed BTN_1
Sat Oct 13 07:27:52 2018 daemon.info [25064]: async run: [ -f /usr/lib/hotspot/control.sh ] && /usr/lib/hotspot/control.sh evaluate
Sat Oct 13 07:27:52 2018 user.notice [Buttons]: released BTN_1
Sat Oct 13 07:27:53 2018 daemon.notice hotspot: control (action="evaluate")
Sat Oct 13 07:27:53 2018 daemon.info [25064]: async run: /etc/init.d/hostapd reload && ubus send config "{'reload':'wireless'}" ;
Sat Oct 13 07:27:53 2018 daemon.notice hostapd: [UCI] Loading radio radio_2G
Sat Oct 13 07:27:53 2018 daemon.notice hostapd: [UCI] Loading radio radio_5G
Sat Oct 13 07:27:53 2018 kern.warn kernel: [30559.467000] wl1: wlc_dfs_cacstate_init: state to IDLE channel 42
Sat Oct 13 07:27:54 2018 kern.warn kernel: [30559.580000] wl1: wlc_dfs_cacstate_init: state to IDLE channel 42
Sat Oct 13 07:27:54 2018 kern.warn kernel: [30559.728000] wl1: wlc_dfs_cacstate_init: state to IDLE channel 42
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ssid wl0
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ssid wl0_1
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ssid wl1
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ssid wl1_1
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ssid wl0_2
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ssid wl0_3
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ssid wl1_2
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ssid wl1_3
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ap ap0
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ap ap1
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ap ap2
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ap ap3
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ap ap4
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ap ap5
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ap ap6
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Loading ap ap7
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Removing hotspot for AP [0]
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Removing hotspot for AP [1]
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Removing hotspot for AP [2]
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Removing hotspot for AP [3]
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Removing hotspot for AP [4]
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Removing hotspot for AP [5]
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Removing hotspot for AP [6]
Sat Oct 13 07:27:54 2018 daemon.notice hostapd: [UCI] Removing hotspot for AP [7]
Sat Oct 13 07:28:00 2018 cron.info crond[3568]: USER root pid 30828 cmd /sbin/trafficmon.lua
Sat Oct 13 07:28:23 2018 daemon.notice [24610]: [mobiled] (WaitingForDevice) runs WaitingForDevice-Main.check(timeout, 1)
and you pressed the status button right?
the one on the right should be WPS...
can you repost uci show button
Yeah, I pressed status then the one on the right. I'm not convinced yet it is wps, fairly sure it togggles wifi on/off iirc but I never use this modem.
/etc/ledfw$ uci show button
button.reset=button
button.reset.action='released'
button.reset.max='90'
button.reset.handler='rtfd'
button.reset.min='7'
button.reset.button='BTN_0'
button.easy_reset=button
button.easy_reset.action='released'
button.easy_reset.max='90'
button.easy_reset.handler='rtfd'
button.easy_reset.min='7'
button.easy_reset.button='BTN_3'
button.dect_paging=button
button.dect_paging.action='released'
button.dect_paging.max='3'
button.dect_paging.handler='ubus call mmpbxbrcmdect.paging toggle'
button.dect_paging.min='0'
button.dect_paging.button='BTN_2'
button.dect_registration=button
button.dect_registration.action='released'
button.dect_registration.max='30'
button.dect_registration.handler='ubus call mmpbxbrcmdect.registration open'
button.dect_registration.min='3'
button.dect_registration.button='BTN_2'
button.wifi_onoff=button
button.wifi_onoff.action='released'
button.wifi_onoff.max='2'
button.wifi_onoff.handler='wifionoff.sh'
button.wifi_onoff.min='0'
button.wifi_onoff.button='BTN_1'
button.wps=button
button.wps.action='released'
button.wps.max='3'
button.wps.handler='wps_button_pressed.sh'
button.wps.min='0'
button.wps.button='BTN_4'
WTF !
BTN_3 IS A SECOND RESET BUTTON O.O WAT
Do this command pls
uci del button.easy_reset
uci set button.info=button
uci set button.info.button='BTN_1'
uci set button.info.action='released'
uci set button.info.handler='logger INFO button pressed ; ubus send infobutton '\''{"state":"active"}'\'''
uci set button.info.min='0'
uci set button.info.max='3'
uci commit
root@mygateway:~# uci del button.easy_reset
root@mygateway:~# uci set button.info=button
root@mygateway:~# uci set button.info.button='BTN_1'
root@mygateway:~# uci set button.info.action='released'
root@mygateway:~# uci set button.info.handler='logger INFO button pressed ; ubus
send infobutton '\''{"state":"active"}'\'''
root@mygateway:~# uci set button.info.min='0'
root@mygateway:~# uci set button.info.max='3'
root@mygateway:~# uci commit
root@mygateway:~#
logread -f and click the button don't know if a reboot is required...
root@mygateway:~# logread -f and click the button
Sat Oct 13 07:40:00 2018 cron.info crond[3568]: USER root pid 32736 cmd /sbin/trafficmon.lua
Sat Oct 13 07:40:05 2018 user.notice [Buttons]: pressed BTN_3
Sat Oct 13 07:40:06 2018 user.notice [Buttons]: released BTN_3
Sat Oct 13 07:40:29 2018 daemon.notice [24610]: [mobiled] (WaitingForDevice) runs WaitingForDevice-Main.check(timeout, 1)
a reboot is needed
Can I use WinSCP Console or do I need to use PuTTY?
should be the same putty is pref
anyway logread -f and click the button
root@mygateway:~# logread -f
Sat Oct 13 07:59:10 2018 user.notice [Buttons]: pressed BTN_3
Sat Oct 13 07:59:11 2018 user.notice [Buttons]: released BTN_3
Sat Oct 13 07:59:34 2018 daemon.notice [5028]: [mobiled] (WaitingForDevice) runs WaitingForDevice-Main.check(timeout, 1)
uci show button
/etc/ledfw$ uci show button
button.reset=button
button.reset.action='released'
button.reset.max='90'
button.reset.handler='rtfd'
button.reset.min='7'
button.reset.button='BTN_0'
button.dect_paging=button
button.dect_paging.action='released'
button.dect_paging.max='3'
button.dect_paging.handler='ubus call mmpbxbrcmdect.paging toggle'
button.dect_paging.min='0'
button.dect_paging.button='BTN_2'
button.dect_registration=button
button.dect_registration.action='released'
button.dect_registration.max='30'
button.dect_registration.handler='ubus call mmpbxbrcmdect.registration open'
button.dect_registration.min='3'
button.dect_registration.button='BTN_2'
button.wifi_onoff=button
button.wifi_onoff.action='released'
button.wifi_onoff.max='2'
button.wifi_onoff.handler='wifionoff.sh'
button.wifi_onoff.min='0'
button.wifi_onoff.button='BTN_1'
button.wps=button
button.wps.action='released'
button.wps.max='3'
button.wps.handler='wps_button_pressed.sh'
button.wps.min='0'
button.wps.button='BTN_4'
button.info=button
button.info.button='BTN_1'
button.info.action='released'
button.info.handler='logger INFO button pressed ; ubus send infobutton '\''{"state":"active"}'\'''
button.info.min='0'
button.info.max='3'
ops i'm an idiot...
uci set button.info.button='BTN_3' uci commit
and retry logread -f and press
No reboot?
root@mygateway:~# logread -f
Sat Oct 13 08:04:36 2018 daemon.notice [5028]: [mobiled] (WaitingForDevice) runs WaitingForDevice-Main.check(timeout, 1)
Sat Oct 13 08:04:42 2018 user.notice [Buttons]: pressed BTN_3
Sat Oct 13 08:04:42 2018 user.notice root: INFO button pressed
Sat Oct 13 08:04:42 2018 user.notice [Buttons]: released BTN_3
Sat Oct 13 08:05:37 2018 daemon.notice [5028]: [mobiled] (WaitingForDevice) runs WaitingForDevice-Main.check(timeout, 1)
...
Interesting. All active leds flashed green for about 1/2 sec then turned off except for status led which stayed green.
Setting: Eco Led - Off
what leds power on ?
anyway timeout value ?
what leds power on ?
Briefly: https://github.com/Ansuel/tch-nginx-gui/issues/264#issuecomment-429296871
Then just status led.
Timeout 5000
switch status led on and save status led off save any change to led?
try to set timeout to 0 and save
results same for both status led switch settings. timeout 0 (active led off) - active leds stay green except status led stays red.
timeout 0 (active led off) - as above.
btw - gui led setting timeout always displays as 5000.
Changing two settings and press save seems to crash gui.
For some reason, technicolor set the info button as a reset.
On 13 Oct 2018, at 5:18 am, flywire notifications@github.com wrote:
results same for both status led switch settings. timeout 0 (active led off) - active leds stay green except status led stays red.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or mute the thread.
Will have to add that into /etc/init.d/rootdevice
Telstra TG800 GUI Version [ 8.8.71 ] After update power led is red (always was green), eco led off
/$ uci show button
button.reset=button
button.reset.button='BTN_0'
button.reset.action='released'
button.reset.handler='rtfd'
button.reset.min='7'
button.reset.max='90'
button.easy_reset=button
button.easy_reset.button='BTN_3'
button.easy_reset.action='released'
button.easy_reset.handler='rtfd'
button.easy_reset.min='7'
button.easy_reset.max='90'
button.dect_paging=button
button.dect_paging.button='BTN_2'
button.dect_paging.action='released'
button.dect_paging.handler='ubus call mmpbxbrcmdect.paging toggle'
button.dect_paging.min='0'
button.dect_paging.max='1'
button.dect_registration=button
button.dect_registration.button='BTN_2'
button.dect_registration.action='released'
button.dect_registration.handler='ubus call mmpbxbrcmdect.registration open'
button.dect_registration.min='1'
button.dect_registration.max='30'
button.wifi_on_off_toggle=button
button.wifi_on_off_toggle.button='BTN_1'
button.wifi_on_off_toggle.action='released'
button.wifi_on_off_toggle.handler='wifionoff.sh'
button.wifi_on_off_toggle.min='0'
button.wifi_on_off_toggle.max='10'
button.wps=button
button.wps.button='BTN_2'
button.wps.action='released'
button.wps.handler='wps_button_pressed.sh'
button.wps.min='1'
button.wps.max='30'
/sbin$ uci show ledfw
ledfw.internet=service
ledfw.internet.check='1'
ledfw.iptv=service
ledfw.iptv.check='1'
ledfw.iptv.itf='iptv'
ledfw.voip=service
ledfw.voip.check='1'
ledfw.timeout=timeout
ledfw.timeout.ms='5000'
ledfw.syslog=syslog
ledfw.syslog.trace='0'
ledfw.status_led=status_led
ledfw.status_led.enable='0'
Listing a few commands:
ls -1 /sys/class/leds/ # leds available
cat /sys/class/leds/power:green/trigger # triggers available and [current] setting
echo "default-on" > /sys/class/leds/power:green/trigger # set trigger
opkg list | grep led # led packages used
# must control three components (red/green/blue) in each led
# power led is red
echo 1 > /sys/class/leds/power:green/brightness # turn on LED
# power led is yellow
echo 0 > /sys/class/leds/power:green/brightness # turn off LED
# power led is green
What modification did you do to tg800?
Il Sab 13 Ott 2018, 11:34 flywire notifications@github.com ha scritto:
Listing a few commands:
ls -1 /sys/class/leds/ # leds available cat /sys/class/leds/power:green/trigger # triggers available and [current] setting echo "default-on" > /sys/class/leds/power:green/trigger # set trigger
must control three components (red/green/blue) in each led
power led is red
echo 1 > /sys/class/leds/power:green/brightness # turn on LED
power led is yellow
echo 0 > /sys/class/leds/power:green/brightness # turn off LED
power led is green
uci commit # write change
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/Ansuel/tch-nginx-gui/issues/264#issuecomment-429526077, or mute the thread https://github.com/notifications/unsubscribe-auth/ATWWQiR4YBcbWF5VOFs9VhEIRFPzzkiUks5ukbPCgaJpZM4XLQDy .
No mods, just GUI Version 8.8.71 install, changes lost on reboot. Runs vnstat using usb.
Are you sure you didn't install dev recently?
Yes this modem auto-upgrade latest dev at 5am.
I've rebooted a couple of times. If I install old firmware I'm certain the led will go back to green.
Included pictures of leds on different models. Names and functions change with model with older black models having 1 or 2 more switches. Suspect config needed for each model.
@flywire then you need to restore the ledfw file cp /rom/etc/ledfw/ /etc/ledfw/ cp /rom/usr/lib/lua/ledframework/ /usr/lib/lua/ledframework cp /rom/sbin/status-led-eventing.lua /sbin/status-led-eventing.lua and reboot
Fixed - red led on power changed to green (5 of six leds back to green, pair not lit as expected).
So Eco Settings have no effect on TG800? Was expect to activate it with a quick push (< 1sec) on power button. I understand >1sec will power off modem.
Note: cp: '/rom/sbin/status-led-eventing.lua' and '/sbin/status-led-eventing.lua' are the same file
btw - TG799 is working well, status led green status switch displays leds as expected.
It looks like ISP disable this function for the firmware so I needs to adds compatibility to statemachines.lua so plz post /etc/ledfw/state...
Il Dom 14 Ott 2018, 14:01 flywire notifications@github.com ha scritto:
Fixed - red led on power changed to green (5 of six leds back to green, pair not lit as expected). So Eco Settings have no effect on TG800? Which switch would it use anyway?
Note: cp: '/rom/sbin/status-led-eventing.lua' and '/sbin/status-led-eventing.lua' are the same file
btw - TG799 is working well, status led green status switch displays leds as expected.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/Ansuel/tch-nginx-gui/issues/264#issuecomment-429620630, or mute the thread https://github.com/notifications/unsubscribe-auth/ATWWQnUFcGjFJqiLi1vgeJUo8LXFGLQHks5ukyd-gaJpZM4XLQDy .
tar -cvzf /tmp/ledfw.tar.gz /etc/ledfw/*
ledfw.tar.gz
Is it possible to disable leds on tg799 ethernet ports?
ethctl might help
On 15 Oct 2018, at 4:06 am, flywire notifications@github.com wrote:
Is it possible to disable leds on tg799 ethernet ports?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or mute the thread.
@flywire in that tar you put 2 stateMachines
can you explain ?
@flywire try this file in /etc/ledfw and restart
also uci show button uci show ledfw stateMachines-tg800.zip
No effect on TG800. After reboot (roll edit back for before reboot):
/etc/ledfw$ uci show button
button.reset=button
button.reset.button='BTN_0'
button.reset.action='released'
button.reset.handler='rtfd'
button.reset.min='7'
button.reset.max='90'
button.easy_reset=button
button.easy_reset.button='BTN_3'
button.easy_reset.action='released'
button.easy_reset.handler='rtfd'
button.easy_reset.min='7'
button.easy_reset.max='90'
button.dect_paging=button
button.dect_paging.button='BTN_2'
button.dect_paging.action='released'
button.dect_paging.handler='ubus call mmpbxbrcmdect.paging toggle'
button.dect_paging.min='0'
button.dect_paging.max='1'
button.dect_registration=button
button.dect_registration.button='BTN_2'
button.dect_registration.action='released'
button.dect_registration.handler='ubus call mmpbxbrcmdect.registration open'
button.dect_registration.min='1'
button.dect_registration.max='30'
button.wifi_on_off_toggle=button
button.wifi_on_off_toggle.button='BTN_1'
button.wifi_on_off_toggle.action='released'
button.wifi_on_off_toggle.handler='wifionoff.sh'
button.wifi_on_off_toggle.min='0'
button.wifi_on_off_toggle.max='10'
button.wps=button
button.wps.button='BTN_2'
button.wps.action='released'
button.wps.handler='wps_button_pressed.sh'
button.wps.min='1'
button.wps.max='30'
/etc/ledfw$ uci show ledfw
ledfw.internet=service
ledfw.internet.check='1'
ledfw.iptv=service
ledfw.iptv.check='1'
ledfw.iptv.itf='iptv'
ledfw.voip=service
ledfw.voip.check='1'
ledfw.timeout=timeout
ledfw.timeout.ms='5000'
ledfw.syslog=syslog
ledfw.syslog.trace='0'
ledfw.status_led=status_led
ledfw.status_led.enable='1'
this is tg 800 right ?
then also here...
uci del button.easy_reset uci set button.info=button uci set button.info.button='BTN_3' uci set button.info.action='released' uci set button.info.handler='logger INFO button pressed ; ubus send infobutton '\''{"state":"active"}'\''' uci set button.info.min='0' uci set button.info.max='3' uci set ledfw.iptv.check='0' uci commit
Eco led - on, green power led, purple voip led all other leds off. How to activate?
Product: vant-y_telstra
Release: Mint (17.2)
Version: 17.2.0213-7041013-20180111070809-4d27e72d40f38e16dc057367d4e4b2bc23c30005
root@mygateway:~# uci del button.easy_reset
uci set button.info.button='BTN_3'
uci set button.info.action='released'
uci set button.info.handler='logger INFO button pressed ; ubus send infobutton '''{"state":"active"}''''
uci set button.info.min='0'
uci set button.info.max='3'
uci set ledfw.iptv.check='0'
uci commitroot@mygateway:~# uci set button.info=button
root@mygateway:~# uci set button.info.button='BTN_3'
root@mygateway:~# uci set button.info.action='released'
root@mygateway:~# uci set button.info.handler='logger INFO button pressed ; ubus
send infobutton '''{"state":"active"}''''
root@mygateway:~# uci set button.info.min='0'
root@mygateway:~# uci set button.info.max='3'
root@mygateway:~# uci set ledfw.iptv.check='0'
root@mygateway:~# uci commit
root@mygateway:~#
/etc/ledfw$ uci show button
button.reset=button
button.reset.button='BTN_0'
button.reset.action='released'
button.reset.handler='rtfd'
button.reset.min='7'
button.reset.max='90'
button.dect_paging=button
button.dect_paging.button='BTN_2'
button.dect_paging.action='released'
button.dect_paging.handler='ubus call mmpbxbrcmdect.paging toggle'
button.dect_paging.min='0'
button.dect_paging.max='1'
button.dect_registration=button
button.dect_registration.button='BTN_2'
button.dect_registration.action='released'
button.dect_registration.handler='ubus call mmpbxbrcmdect.registration open'
button.dect_registration.min='1'
button.dect_registration.max='30'
button.wifi_on_off_toggle=button
button.wifi_on_off_toggle.button='BTN_1'
button.wifi_on_off_toggle.action='released'
button.wifi_on_off_toggle.handler='wifionoff.sh'
button.wifi_on_off_toggle.min='0'
button.wifi_on_off_toggle.max='10'
button.wps=button
button.wps.button='BTN_2'
button.wps.action='released'
button.wps.handler='wps_button_pressed.sh'
button.wps.min='1'
button.wps.max='30'
button.info=button
button.info.button='BTN_3'
button.info.action='released'
button.info.handler='logger INFO button pressed ; ubus send infobutton {state:active}'
button.info.min='0'
button.info.max='3'
/etc/ledfw$ uci show ledfw
ledfw.internet=service
ledfw.internet.check='1'
ledfw.iptv=service
ledfw.iptv.itf='iptv'
ledfw.iptv.check='0'
ledfw.voip=service
ledfw.voip.check='1'
ledfw.timeout=timeout
ledfw.timeout.ms='5000'
ledfw.syslog=syslog
ledfw.syslog.trace='0'
ledfw.status_led=status_led
ledfw.status_led.enable='1'
Try press the info button
Il Mar 16 Ott 2018, 09:20 flywire notifications@github.com ha scritto:
Eco led - on, green power led, purple voip led all other leds off. How to activate?
Product: vant-y_telstra Release: Mint (17.2) Version: 17.2.0213-7041013-20180111070809-4d27e72d40f38e16dc057367d4e4b2bc23c30005
root@mygateway:~# uci del button.easy_reset uci set button.info.button='BTN_3' uci set button.info.action='released' uci set button.info.handler='logger INFO button pressed ; ubus send infobutton '''{"state":"active"}'''' uci set button.info.min='0' uci set button.info.max='3' uci set ledfw.iptv.check='0' uci commitroot@mygateway:~# uci set button.info=button root@mygateway:~# uci set button.info.button='BTN_3' root@mygateway:~# uci set button.info.action='released' root@mygateway:~# uci set button.info.handler='logger INFO button pressed ; ubus send infobutton '''{"state":"active"}'''' root@mygateway:~# uci set button.info.min='0' root@mygateway:~# uci set button.info.max='3' root@mygateway:~# uci set ledfw.iptv.check='0' root@mygateway:~# uci commit root@mygateway:~#
/etc/ledfw$ uci show button button.reset=button button.reset.button='BTN_0' button.reset.action='released' button.reset.handler='rtfd' button.reset.min='7' button.reset.max='90' button.dect_paging=button button.dect_paging.button='BTN_2' button.dect_paging.action='released' button.dect_paging.handler='ubus call mmpbxbrcmdect.paging toggle' button.dect_paging.min='0' button.dect_paging.max='1' button.dect_registration=button button.dect_registration.button='BTN_2' button.dect_registration.action='released' button.dect_registration.handler='ubus call mmpbxbrcmdect.registration open' button.dect_registration.min='1' button.dect_registration.max='30' button.wifi_on_off_toggle=button button.wifi_on_off_toggle.button='BTN_1' button.wifi_on_off_toggle.action='released' button.wifi_on_off_toggle.handler='wifionoff.sh' button.wifi_on_off_toggle.min='0' button.wifi_on_off_toggle.max='10' button.wps=button button.wps.button='BTN_2' button.wps.action='released' button.wps.handler='wps_button_pressed.sh' button.wps.min='1' button.wps.max='30'button.info=button button.info.button='BTN_3' button.info.action='released' button.info.handler='logger INFO button pressed ; ubus send infobutton {state:active}' button.info.min='0' button.info.max='3' /etc/ledfw$ uci show ledfw ledfw.internet=service ledfw.internet.check='1' ledfw.iptv=service ledfw.iptv.itf='iptv' ledfw.iptv.check='0' ledfw.voip=service ledfw.voip.check='1' ledfw.timeout=timeoutledfw.timeout.ms='5000' ledfw.syslog=syslog ledfw.syslog.trace='0' ledfw.status_led=status_led ledfw.status_led.enable='1'
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/Ansuel/tch-nginx-gui/issues/264#issuecomment-430128737, or mute the thread https://github.com/notifications/unsubscribe-auth/ATWWQoeap-P3Au-nXBzU8yYXIRU2d9oBks5ulYjOgaJpZM4XLQDy .
https://github.com/Ansuel/tch-nginx-gui/issues/264#issuecomment-428102932 - Which one is info?
Press switches: power- power cycle, pair - nothing, wifi - nothing.
Can you do logread -f and press the button?
Pressed power button:
No other power button? Can you try the switch in the eco card? Also it's disabled?
Il Mar 16 Ott 2018, 10:17 flywire notifications@github.com ha scritto:
Pressed power button:
[image: image] https://user-images.githubusercontent.com/11288701/47002217-1564ac00-d178-11e8-899f-91d6e15213c7.png
[image: image] https://user-images.githubusercontent.com/11288701/47002170-fa923780-d177-11e8-8154-4f1765f2de08.png
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/Ansuel/tch-nginx-gui/issues/264#issuecomment-430144893, or mute the thread https://github.com/notifications/unsubscribe-auth/ATWWQhzKm5rJPQT1MiZh2U10BUQXWENvks5ulZYbgaJpZM4XLQDy .
Device Model: TG799vac Gui Version: 8.8.56
Description of problem: Eco LED settings has no effect