Not showen up the ra0 instead of wlan on BELA

Anthony96922 / mt7601u-ap

AP driver for MT7601U dongles

GNU General Public License v2.0

117 stars 48 forks source link

Not showen up the ra0 instead of wlan on BELA #24

Open martinhurych opened 3 years ago

martinhurych commented 3 years ago

After installing the driver on my BELA it still doesn's shown the ra0 instead of wlan port. I have tried these steps https://forum.bela.io/d/1423-wifi-dongle/38 . Screenshot_1

Any advices? Thank you in advance.

giuliomoro commented 3 years ago

Bela is Debian Stretch with kernel 4.14.108-ti-xenomai-r135

wasalm commented 1 year ago

Had the same issue. I had to disable the standard wifi driver to make it work

fhteagle commented 1 year ago

@wasalm - can you provide a bit more detail on what you did to make it work? I tried to rmmod the regular mt7601u kernel module, move firmware .bin file from /lib/firmware/mediatek , but so far no luck. Without mt7601u module, there is no interface at all. With that module, I only get the wlan0 / no AP version of the driver loaded (according to iw phy).

Thanks

wasalm commented 1 year ago

Sorry, I've got stuck on another issue and abandoned this project.