[X] I searched the existing issues and did not find anything similar.
Current Behavior
On the main mapping screen, if you insert a "release" tile with some other tiles, it will appear as "[NO KEY] instead of the full command sequence entered.
Expected Behavior
It should show the full tile sequence
Steps To Reproduce
1) Start with a fresh mapping screen
2) Enter for a particular button "Release (0.1s) | CTRL | ENTER"
3) Save the button config
4) Observe UI says "[NO BUTTON]" making it difficult to tell at a glance if button is actually set or not.
Environment
Program Version 3.3.3
Program Compiled on Feb 3 2023 at 18:28:32
Built Against SDL 2.26.2
Running With SDL 2.26.4
Using Qt 5.15.8
Using Event Handler: XTest
Compositor type: x11
Host OS: manjaro Version: unknown Architecture: x86_64
Is there an existing issue for this?
Current Behavior
On the main mapping screen, if you insert a "release" tile with some other tiles, it will appear as "[NO KEY] instead of the full command sequence entered.
Expected Behavior
It should show the full tile sequence
Steps To Reproduce
1) Start with a fresh mapping screen 2) Enter for a particular button "Release (0.1s) | CTRL | ENTER" 3) Save the button config 4) Observe UI says "[NO BUTTON]" making it difficult to tell at a glance if button is actually set or not.
Environment
Anything else?
Image of happening: https://imgur.com/a/fEkkZFn
Upvote & Fund