What to do - Githubissues

There are a number of commands which need to be implemented. They are listed below but should later get their own issues as needed.

[x] Horizontal tab
[x] Print and line feed
[x] Print and return to Standard mode (in Page mode)
[x] End job (in Standard mode)
[x] Print and carriage return
[ ] Transmit real-time status
[x] Send real-time request to printer
[x] Generate pulse in real-time
[x] Execute power-off sequence
[x] Sound buzzer in real-time
[x] Transmit specified status in real time
[x] Clear buffer(s)
[ ] Cancel print data in Page mode
[ ] Print data in Page mode
[ ] Set right-side character spacing
[ ] Select print mode(s)
[ ] Set absolute print position
[ ] Select/cancel user-defined character set
[ ] Define user-defined characters
[x] Control beeper tones
[x] Beep the buzzer
[x] Model specific buzzer control (fn=97)
[x] Model specific buzzer control (fn=98)
[x] Model specific buzzer control (fn=99)
[ ] Specify batch print
[x] Select bit-image mode
[x] Turn underline mode on/off
[x] Select default line spacing
[x] Set line spacing
[ ] Return home
[x] Select peripheral device
[ ] Cancel user-defined characters
[x] Initialize printer
[ ] Set horizontal tab positions
[x] Turn emphasized mode on/off
[x] Turn double-strike mode on/off
[x] Print and feed paper
[x] Print and reverse feed
[ ] Select Page mode
[ ] Select character font
[ ] Select an international character set
[ ] Select Standard mode
[ ] Select print direction in Page mode
[ ] Turn unidirectional print mode on/off
[ ] Turn 90° clockwise rotation mode on/off
[ ] Set print area in Page mode
[ ] Set relative print position
[ ] Select justification
[ ] Select paper sensor(s) to output paper-end signals
[ ] Select paper sensor(s) to stop printing
[ ] Enable/disable panel buttons
[x] Print and feed n lines
[x] Print and reverse feed n lines
[ ] Partial cut (one point left uncut)
[ ] Partial cut (three points left uncut)
[x] Generate pulse
[ ] Select print color
[ ] Select character code table
[ ] Transmit peripheral device status
[ ] Transmit paper sensor status
[x] Turn upside-down print mode on/off
[ ] Select print mode(s) for Kanji characters
[ ] Select Kanji character mode
[ ] Select Kanji character style(s)
[ ] Select Kanji character font
[ ] Select code conversion method
[ ] Select character encode system
[ ] Set font priority
[ ] Group of commands for receipt enhancement control
[ ] Transmit set values for top/bottom logo printing
[ ] Set top logo printing
[ ] Set bottom logo printing
[ ] Make extended settings for top/bottom logo printing
[ ] Enable/disable top/bottom logo printing
[ ] Select label and black mark control function(s)
[ ] Paper layout setting
[ ] Paper layout information transmission
[ ] Transmit the positioning information
[ ] Feed paper to the label peeling position
[ ] Feed paper to the cutting position
[ ] Feed paper to the print starting position
[ ] Paper layout error special margin setting
[ ] Enable/disable Automatic Status Back (ASB) for optional functions (extended status)
[ ] Turn underline mode on/off for Kanji characters
[ ] Cancel Kanji character mode
[ ] Define user-defined Kanji characters
[ ] Cancel user-defined Kanji characters
[ ] Select Kanji character code system
[ ] Set Kanji character spacing
[ ] Turn quadruple-size mode on/off for Kanji characters
[ ] Write to NV user memory
[ ] Read from NV user memory
[x] Print NV bit image
[x] Define NV bit image
[ ] Select character size
[ ] Set absolute vertical print position in Page mode
[x] Execute test print
[ ] Edit NV user memory
[ ] Delete the specified record
[ ] Store the data in the specified record
[ ] Transmit the data in the specified record
[ ] Transmit capacity of the NV user memory currently being used
[ ] Transmit the remaining capacity of the NV user memory
[ ] Transmit the key code list
[ ] Delete all data in the NV user memory
[x] Enable/disable real-time command
[ ] Set user setup commands
[ ] Change into the user setting mode
[ ] End the user setting mode session
[ ] Change the memory switch
[ ] Change the memory switch
[ ] Set the customized setting values
[ ] Transmit the customized setting values
[ ] Copy the user-defined page
[ ] Define the data (column format) for the character code page
[ ] Define the data (raster format) for the character code page
[ ] Delete the data for the character code page
[ ] Set the configuration item for the serial interface
[ ] Transmit the configuration item for the serial interface
[ ] Set the configuration item for the Bluetooth interface
[ ] Transmit the configuration item for the Bluetooth interface
[ ] Set conditions for USB interface communication
[ ] Transmit conditions for USB interface communication
[ ] Delete the paper layout
[ ] Set the paper layout
[ ] Transmit the paper layout information
[ ] Set the control for label paper and paper with black marks
[ ] Transmit the control settings for label paper and paper with black marks
[x] Set internal buzzer patterns
[x] Transmit internal buzzer patterns
[ ] Request transmission of response or status
[ ] Specifies the process ID response
[ ] Specifies the offline response
[ ] Select print control method(s)
[ ] Select the print control mode
[x] Select the print density
[x] Select the print speed
[ ] Select the number of parts for the thermal head energizing
[ ] Set graphics data
[ ] Transmit the NV graphics memory capacity
[ ] Set the reference dot density for graphics
[ ] Print the graphics data in the print buffer
[ ] Transmit the remaining capacity of the NV graphics memory
[ ] Transmit the remaining capacity of the download graphics memory
[ ] Transmit the key code list for defined NV graphics
[ ] Delete all NV graphics data
[ ] Delete the specified NV graphics data
[ ] Define the NV graphics data (raster format)
[ ] Define the NV graphics data (column format)
[ ] Print the specified NV graphics data
[ ] Transmit the key code list for defined download graphics
[ ] Delete all download graphics data
[ ] Delete the specified download graphics data
[ ] Define the download graphics data (raster format)
[ ] Define the download graphics data (column format)
[ ] Print the specified download graphics data
[ ] Store the graphics data in the print buffer (raster format)
[ ] Store the graphics data in the print buffer (column format)
[ ] Customize printer control value(s)
[ ] Save the setting values from the work area into the storage area
[ ] Load the setting values stored in the storage area to the work area
[ ] Select the setting values loaded to the work area after the initialization process
[ ] Select character effects
[ ] Select character color
[ ] Select background color
[ ] Turn shading mode on/off
[ ] Page mode control
[ ] Set the printable area in Page mode
[ ] Commands for drawing graphics
[ ] Draw line
[ ] Draw rectangle
[ ] Specify paper cut
[ ] Paper cut
[ ] Paper feed and cut
[ ] Paper cut reservation
[ ] Set up and print the symbol
[ ] PDF417: Set the number of columns in the data region
[ ] PDF417: Set the number of rows
[ ] PDF417: Set the width of the module
[ ] PDF417: Set the row height
[ ] PDF417: Set the error correction level
[ ] PDF417: Select the options
[ ] PDF417: Store the data in the symbol storage area
[ ] PDF417: Print the symbol data in the symbol storage area
[ ] PDF417: Transmit the size information of the symbol data in the symbol storage area
[x] QR Code: Select the model
[x] QR Code: Set the size of module
[x] QR Code: Select the error correction level
[x] QR Code: Store the data in the symbol storage area
[x] QR Code: Print the symbol data in the symbol storage area
[x] QR Code: Transmit the size information of the symbol data in the symbol storage area
[ ] MaxiCode: Select the mode
[ ] MaxiCode: Store the data in the symbol storage area
[ ] MaxiCode: Print the symbol data in the symbol storage area
[ ] MaxiCode: Transmit the size information of the symbol data in the symbol storage area
[ ] 2-dimensional GS1 DataBar: Set the width of the module
[ ] 2-dimensional GS1 DataBar: GS1 DataBar Expanded Stacked maximum width setting
[ ] 2-dimensional GS1 DataBar: Store data in the symbol storage area
[ ] 2-dimensional GS1 DataBar: Print the symbol data in the symbol storage area
[ ] 2-dimensional GS1 DataBar: Transmit the size information of the symbol data in the symbol storage area
[ ] Composite Symbology: Set the width of the module
[ ] Composite Symbology: GS1 DataBar Expanded Stacked maximum width setting
[ ] Composite Symbology: Select HRI character font
[ ] Composite Symbology: Store the data in the symbol storage area
[ ] Composite Symbology: Print the symbol data in the symbol storage area
[ ] Composite Symbology: Transmit the size information of the symbol data in the symbol storage area
[ ] Aztec Code: Set the number of mode types and data layers
[ ] Aztec Code: Set the size of the module
[ ] Aztec Code: Set the error correction level
[ ] Aztec Code: Store the data in the symbol storage area
[ ] Aztec Code: Print the symbol data in the symbol storage area
[ ] Aztec Code: Transmit the size information of the symbol data in the symbol storage area
[ ] DataMatrix: Set the symbol type, number of columns, number of rows
[ ] DataMatrix: Set the size of the module
[ ] DataMatrix: Store the data in the symbol storage area
[ ] DataMatrix: Print the symbol data in the symbol storage area
[ ] DataMatrix: Transmit the size information of the symbol data in the symbol storage area
[x] Define downloaded bit image
[x] Print downloaded bit image
[ ] Start/end macro definition
[ ] Turn white/black reverse print mode on/off
[ ] Select counter print mode
[ ] Select count mode (A)
[ ] Set counter
[ ] Select count mode (B)
[ ] Specify Windows BMP graphics data
[ ] Define Windows BMP NV graphics data
[ ] Define Windows BMP download graphics data
[ ] Select print position of HRI characters
[x] Transmit printer ID
[ ] Set left margin
[ ] Set horizontal and vertical motion units
[x] Print variable vertical size bit image
[ ] Set print position to the beginning of print line
[ ] Select cut mode and cut paper
[ ] Set print area width
[ ] Set relative vertical print position in Page mode
[ ] Execute macro
[ ] Enable/disable Automatic Status Back (ASB)
[x] Turn smoothing mode on/off
[ ] Print counter
[ ] Select font for HRI characters
[x] Initialize maintenance counter
[x] Transmit maintenance counter
[x] Set barcode height
[ ] Enable/disable Automatic Status Back (ASB) for ink
[x] Print barcode
[ ] Transmit status
[x] Print raster bit image
[x] Set barcode width
[x] Set online recovery wait time

AntonJoha / esc-pos-lib

What to do #1