Dislocker error

[Gt3pccb]

Hello, I am using Linux 5.4.0-96-generic #109-Ubuntu SMP Wed Jan 12 16:49:16 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux and I have a problem unlocking a NTFS or exFAT volume with bitlocker.

I can mount partitions in the same drive that are not protected with Bitlocker, which leads me to believe that the error I am getting is not a hardware error.

Disk /dev/sdb: 6.101 TiB, 7681501126656 bytes, 15002931888 sectors Disk model: Micron_5300_MTFD Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: gpt Disk identifier: CAAEB273-5271-45DE-938A-E459A11D17C9

Device Start End Sectors Size Type /dev/sdb1 34 32767 32734 16M Microsoft reserved /dev/sdb2 32768 15002929151 15002896384 7T Microsoft basic data

The commands I have tried are the following which all failed with the same error.

1. sudo dislocker -v -V /dev/sdb2 -uMyPassword –- /media/bitlocker
2. sudo dislocker -v -V /dev/sdb2 -pMyPassword –- /media/bitlocker
3. sudo dislocker -v -V /dev/sdb2 -uTheNumbericPassword –- /media/bitlocker
4. sudo dislocker -v -V /dev/sdb2 -pTheNumbericPassword –- /media/bitlocker

Fri Jan 21 15:21:52 2022 [ERROR] Failed to read in #3: Input/output error Fri Jan 21 15:21:52 2022 [CRITICAL] Error during reading the volume: not enough byte read.

Any help would be greatly appreciated. Thank you

[Aorimn]

For some reason, dislocker cannot read /dev/sdb2. Can you try to run "sudo su -", then the dislocker commands?

[Gt3pccb]

Hi, I am root, and even adding sudo does not help. I have a question and I hope you can help. I am running into this error https://github.com/Aorimn/dislocker/issues/160 as well. How do I install the latest dislocker in ubuntu? I am in 0.71, and even if I do an update stays at 0.71

I would really appreciate your help on installing the 0.74 version you discussed in one of your threads.

Thank you Astolfo

From: Aorimn @.> Sent: Tuesday, January 25, 2022 9:29 AM To: Aorimn/dislocker @.> Cc: Astolfo Rueda @.>; Author @.> Subject: Re: [Aorimn/dislocker] Dislocker error (Issue #274)

For some reason, dislocker cannot read /dev/sdb2. Can you try to run "sudo su -", then the dislocker commands?

- Reply to this email directly, view it on GitHubhttps://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FAorimn%2Fdislocker%2Fissues%2F274%23issuecomment-1021434659&data=04%7C01%7Castolfor%40microsoft.com%7C1468f50dad564bd1249d08d9e028384a%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637787285627161863%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=N30HSC3YUFQrRZUNLSN6sRjAh8DnO1IY0uHq3Ajjiis%3D&reserved=0, or unsubscribehttps://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAMCJBC47DCRU6DOL6UDIGGDUX3MW7ANCNFSM5MQZHLKA&data=04%7C01%7Castolfor%40microsoft.com%7C1468f50dad564bd1249d08d9e028384a%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637787285627161863%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=8dL6GMnPGt7JPg6O9Gt7GrIxqqjDN6npN8iU%2FdC3SMY%3D&reserved=0. Triage notifications on the go with GitHub Mobile for iOShttps://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapps.apple.com%2Fapp%2Fapple-store%2Fid1477376905%3Fct%3Dnotification-email%26mt%3D8%26pt%3D524675&data=04%7C01%7Castolfor%40microsoft.com%7C1468f50dad564bd1249d08d9e028384a%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637787285627161863%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=Rw6YvcIbb%2FimJuvzS9JKr3LHi%2B%2FpyuI5GtcFzGqzW9w%3D&reserved=0 or Androidhttps://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplay.google.com%2Fstore%2Fapps%2Fdetails%3Fid%3Dcom.github.android%26referrer%3Dutm_campaign%253Dnotification-email%2526utm_medium%253Demail%2526utm_source%253Dgithub&data=04%7C01%7Castolfor%40microsoft.com%7C1468f50dad564bd1249d08d9e028384a%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637787285627161863%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=TMZyBrboqW%2FZW18z26K%2BJPm8ibmy%2F3w%2FzE4eUcgMae0%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>

[Aorimn]

The INSTALL.md file gives such indications. Can you follow its instructions and come back if you encounter an error?