Open mwpastore opened 3 years ago
Hi,
Normally all the standard SFP+ modules should be OK, but I know there exist some incompats or even black lists. Unfortunately can't do nothing here from driver side (
Thanks @cail, I appreciate the quick response. Who can I reach out to for hardware support? Asus?
You may try Asus, sure. But the chip design is under Marvell...
same problem try 2 cooper cable a same result Supported FEC modes: Not reported Advertised link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full 2500baseT/Full 5000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: Unknown! Duplex: Unknown! (255) Port: FIBRE PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pg Wake-on: g Current message level: 0x00000005 (5) drv link Link detected: no root@superm2:~# ethtool -i enp2s0 driver: atlantic version: 2.4.10.0 firmware-version: 3.1.109 expansion-rom-version: bus-info: 0000:02:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: yes supports-priv-flags: yes
microtik cloud switch , cisco ... ( switch to switch working)
Another one here with this wire: [10 GB/s SFP+ DAC Cable 1-metro Pasivo, Compatible con Cisco SFP-H10GB-CU1M, Ubiquiti, Netgear, D-Link, TP-Link, Zyxel,and Other Open Switches] from H!Fiber.com
I've compiled and installed this module and unfortunately an Asus XG-C100F card won't detect a SFP-10G-SR (FS.COM "Generic") transceiver. It's my understanding that these should be compatible. Any suggestions?
Thank you in advance!