search

ArcadeHustle / X3_Multi_Eye_for_an_Eye

After the sickening Darkdawg Arcade team refusal to participate in the Eye for an Eye Match, an X3 Multi will be released.
10 stars 19 forks source link

X3 multi Test - TX3 model 404 #6

Open ArcadePit opened 3 years ago

ArcadePit commented 3 years ago

Test of the multi TX3 multi, here is the sheet below (same base as GamingMackie to make things simple)

https://docs.google.com/spreadsheets/d/1hy0Q7Gtn0gZF-FnXbkWyOALitsVLGx4mBeUemBOcY5Q/edit?usp=sharing

I am using a 404 TX3 motherboard, and a GFI Limited G-Balance Cabinet.

I have some different behaviors regarding GamingMackie's feedback, especially Test menus are accessed with 3rd Strike, Hyper Street, Zero 3 and Vampire Savior.

I also tried CRT Geomod plugin for some Low Res games.

Overall every game is playable except Puzzle Bobble, which gives a fast IO error.

MagusIncognito commented 3 years ago

Thank for the feedback.

I'm having similar issues as GamingMackie unfortunately, but it sounds like you have things almost completely working on your end.

I have the same specs TTX3 unit as you, but am using in a Vewlix with Taito ver.1 I/O board and Black Diamond monitor. I'm thinking the difference with test results are due to rom sets and not the cabinet hardware.

Would you mind sharing what romset are you using? Obviously I have access to the ones on Emuline, and I have the romset from Niko on his last TTX2Multi ver2.0. Currently am using and testing ones acquired from Niko.

Thanks!

ArcadePit commented 3 years ago

Hi,

Same romset found on emuline, but with cleaned game folders (no gameloader files for examples). Multi uses some launcher.exe/dll files, keep and do not replace/delete them.

MagusIncognito commented 3 years ago

Good to know, thank you!

GamingMackie commented 3 years ago

Thanks for the additional testings.

I tried these CRTGeoMod shadders also on my side. It took me quite a time to understand why I had mixed results, it was because I set the shader forced to 1280 x 720 (which I thought is the standard 720p resolution), but it appears the forced resolution shall be set to 1280 x 768 which is actually what the ttx3 really output in 720p mode (dip switch 2 off). I have tested that on few games and the result is really good.

dremcast commented 3 years ago

Ok I will be more specific and my master told me I have My taito type x3 cpu and I have the yoko multi image whitout games I also have to games I want add to the multi. . Sf5 and samurai . How can I add this game to that multi .????!