supprot
commented
6 years ago @sin2Lattre
Hi, Have you try choose NodeMCU ESP-12E module instead of ArduCAM ESP8266 UNO from Arduino IDE? Please choose Tools->Boards and choose NodeMCU ESP-12E module to try.
Basic Infos
Hardware
Hardware: ESP-12F Core Version: 2.2.3
Description
Settings in IDE
Module: ArduCAM ESP8266 UNO Flash Size: 4MB CPU Frequency: 80 MHz Flash Mode:
Flash Frequency:
Upload Using: SERIAL
Sketch
int led = 13;
// the setup routine runs once when you press reset: void setup() {
// initialize the digital pin as an output. pinMode(led, OUTPUT);
}
// the loop routine runs over and over again forever: void loop() { digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level) delay(1000); // wait for a second digitalWrite(led, LOW); // turn the LED off by making the voltage LOW delay(1000); // wait for a second }
Debug Messages
Arduino : 1.8.2 (Windows 7), TD: 1.36, Carte : "ArduCAM ESP8266 UNO, 80 MHz, 921600, 4M (3M SPIFFS)"
C:\D\arduino-1.8.2\arduino-builder -dump-prefs -logger=machine -hardware C:\D\arduino-1.8.2\hardware -hardware U:\Documents\Arduino\hardware -tools C:\D\arduino-1.8.2\tools-builder -tools C:\D\arduino-1.8.2\hardware\tools\avr -built-in-libraries C:\D\arduino-1.8.2\libraries -libraries U:\Documents\Arduino\libraries -fqbn=ArduCAM:esp8266com:ArduCAM_ESP8266_UNO:CpuFrequency=80,UploadSpeed=921600,FlashSize=4M3M -ide-version=10802 -build-path C:\temp\arduino_build_392180 -warnings=none -build-cache C:\temp\arduino_cache_134736 -prefs=build.warn_data_percentage=75 -verbose C:\D\arduino-1.8.2\examples\01.Basics\Blink\Blink.ino C:\D\arduino-1.8.2\arduino-builder -compile -logger=machine -hardware C:\D\arduino-1.8.2\hardware -hardware U:\Documents\Arduino\hardware -tools C:\D\arduino-1.8.2\tools-builder -tools C:\D\arduino-1.8.2\hardware\tools\avr -built-in-libraries C:\D\arduino-1.8.2\libraries -libraries U:\Documents\Arduino\libraries -fqbn=ArduCAM:esp8266com:ArduCAM_ESP8266_UNO:CpuFrequency=80,UploadSpeed=921600,FlashSize=4M3M -ide-version=10802 -build-path C:\temp\arduino_build_392180 -warnings=none -build-cache C:\temp\arduino_cache_134736 -prefs=build.warn_data_percentage=75 -verbose C:\D\arduino-1.8.2\examples\01.Basics\Blink\Blink.ino Using board 'ArduCAM_ESP8266_UNO' from platform in folder: U:\Documents\Arduino\hardware\ArduCAM\esp8266com Using core 'esp8266' from platform in folder: U:\Documents\Arduino\hardware\ArduCAM\esp8266com Detecting libraries used... recipe.preproc.macros est un schéma manquant
Erreur de compilation pour la carte ArduCAM ESP8266 UNO
messages here
Hi,
I just try to install the board on my computer and I obtain this message. Could you help me to solve it ?