search

ArduCAM / ArduCAM_USB_Camera_Shield

This is the repository for ArduCAM USB Camera Shield
126 stars 69 forks source link

MT9V034 initialization failed #107

Closed vvostri closed 5 years ago

vvostri commented 5 years ago

Hi,

I just got a MT9V034 board that I am using with USB 2.0 shield under Raspbian. The configuration file is https://github.com/ArduCAM/ArduCAM_USB_Camera_Shield/blob/master/python_config/MT9V034_VGA.json

The camera fails to initialize with error code 65281.

lsusb command with just the USB shield correctly returns ID 52cb:52cb, but this device disappears when I connect MT9V034 to the USB shield.

Same camera shield works fine with the AR0134 camera module.

Is this the faulty MT9V034 board, or am I missing something?

Thank you.

ArduCAM commented 5 years ago

Please provide your hardware setup photos and software error message screenshot?

vvostri commented 5 years ago

My mistake: I used the flex cable instead of the primary interface.

http://blog.uctronics.com/downloads/modules/industrial/ArduCAM_USB_Camera_MT9V034AN.pdf