When I run
sudo ArduCAM_USB_Camera_Shield/Nvidia_Jetson/Python/Streaming_demo/ArduCam_Py_Demo.py ArduCAM_USB_Camera_Shield/Config/USB3.0_UC-593 Rev.C+UC-512_Rev.C/4_to_1/OV9281/4_to_1/OV9281_MIPI_2Lane_RAW8_1280x800_4_to_1_45fps.cfg
I get following error message
4_to_1_45fps.cfg color mode 0 open fail,rtn_val = 65281
When I run
sudo ArduCAM_USB_Camera_Shield/Nvidia_Jetson/Python/Streaming_demo/ArduCam_Py_Demo.py ArduCAM_USB_Camera_Shield/Config/USB3.0_UC-593 Rev.C+UC-512_Rev.C/4_to_1/OV9281/4_to_1/OV9281_MIPI_2Lane_RAW8_1280x800_4_to_1_45fps.cfg
I get following error message4_to_1_45fps.cfg color mode 0 open fail,rtn_val = 65281
I followed the instructions for installing Camera Driver and setting up demo code to confirm /dev/video0 is detected. My setup is Arducam 1MP*4 Quadrascopic Camera Bundle Kit for Raspberry Pi, Nvidia Jetson Nano/Xavier NX, Four OV9782 Global Shutter Color Camera Modules and Camarray Camera HAT connected to Jetson NX