dennis-ard
commented
1 year ago I'm sorry, but all of our support is now focused solely on the official development kit. If you are using a third-party kit, it's possible that the bottom plate was made by the third party and may not be compatible with our products.but this is not always the case. Unfortunately, we do not have the resources to support third-party backplanes as there are too many and it's beyond our scope.
If you plan to use it for a project, we offer corresponding services to support your needs. Please feel free to contact sales@arducam.com if you require further assistance.
Hi all, I'm new to setting up the TOF camera on my Jetson Nano, but I ran in to the following problems. Hoping for some guidance! My Jetson is installed with Jetpack 4.2.1 # R32 (release), REVISION: 7.1 Here's the log from Terminal:
Hit:1 https://repo.download.nvidia.com/jetson/common r32.7 InRelease Hit:2 https://repo.download.nvidia.com/jetson/t210 r32.7 InRelease
Hit:3 http://ports.ubuntu.com/ubuntu-ports bionic InRelease
Hit:4 http://ports.ubuntu.com/ubuntu-ports bionic-updates InRelease
Hit:5 https://arducam.github.io/arducam_ppa linux InRelease
Hit:6 http://ports.ubuntu.com/ubuntu-ports bionic-backports InRelease
Hit:7 http://ports.ubuntu.com/ubuntu-ports bionic-security InRelease Reading package lists... Done
Building dependency tree
Reading state information... Done 26 packages can be upgraded. Run 'apt list --upgradable' to see them. Reading package lists... Done Building dependency tree
Reading state information... Done arducam-config-parser-dev is already the newest version (0.1.1). arducam-tof-sdk-dev is already the newest version (0.1.0). arducam-usb-sdk-dev is already the newest version (2.0.1). 0 upgraded, 0 newly installed, 0 to remove and 26 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up arducam-nvidia-l4t-kernel (4.9.253-tegra-32.7.1-20220316013810) ... 1
An unknown error occurred while installing dtoverlays. dpkg: error processing package arducam-nvidia-l4t-kernel (--configure): installed arducam-nvidia-l4t-kernel package post-installation script subprocess returned error exit status 255 Errors were encountered while processing: arducam-nvidia-l4t-kernel E: Sub-process /usr/bin/dpkg returned an error code (1) Reading package lists... Done Building dependency tree
Reading state information... Done cmake is already the newest version (3.10.2-1ubuntu2.18.04.2). curl is already the newest version (7.58.0-2ubuntu3.24). 0 upgraded, 0 newly installed, 0 to remove and 26 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up arducam-nvidia-l4t-kernel (4.9.253-tegra-32.7.1-20220316013810) ... 1
An unknown error occurred while installing dtoverlays. dpkg: error processing package arducam-nvidia-l4t-kernel (--configure): installed arducam-nvidia-l4t-kernel package post-installation script subprocess returned error exit status 255 Errors were encountered while processing: arducam-nvidia-l4t-kernel E: Sub-process /usr/bin/dpkg returned an error code (1) --2023-06-27 21:56:18-- https://github.com/ArduCAM/MIPI_Camera/releases/download/v0.0.3/install_full.sh Resolving github.com (github.com)... 20.205.243.166 Connecting to github.com (github.com)|20.205.243.166|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://objects.githubusercontent.com/github-production-release-asset-2e65be/186627215/70ef1793-bf76-4487-aa0b-2848ee681be7?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20230627%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20230627T135618Z&X-Amz-Expires=300&X-Amz-Signature=8c743b01877c056abd7ba6db9743254b3fbb6017f81c23644b36aa85f4960c8e&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=186627215&response-content-disposition=attachment%3B%20filename%3Dinstall_full.sh&response-content-type=application%2Foctet-stream [following] --2023-06-27 21:56:18-- https://objects.githubusercontent.com/github-production-release-asset-2e65be/186627215/70ef1793-bf76-4487-aa0b-2848ee681be7?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20230627%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20230627T135618Z&X-Amz-Expires=300&X-Amz-Signature=8c743b01877c056abd7ba6db9743254b3fbb6017f81c23644b36aa85f4960c8e&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=186627215&response-content-disposition=attachment%3B%20filename%3Dinstall_full.sh&response-content-type=application%2Foctet-stream Resolving objects.githubusercontent.com (objects.githubusercontent.com)... 185.199.109.133, 185.199.108.133, 185.199.111.133, ... Connecting to objects.githubusercontent.com (objects.githubusercontent.com)|185.199.109.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 13773 (13K) [application/octet-stream] Saving to: ‘install_full.sh.1’
install_full.sh.1 100%[===================>] 13.45K --.-KB/s in 0.003s
2023-06-27 21:56:19 (4.29 MB/s) - ‘install_full.sh.1’ saved [13773/13773]
NVIDIA Jetson Nano Developer Kit ./install_full.sh: 302: ./install_full.sh: source: not found ./install_full.sh: 308: ./install_full.sh: Bad substitution