Replace ESP32-Cam with ArduCam OV2640

[Emilex108]

Hi,

I bought an ESP32-Cam and have been using the WebServer script that comes with it to Stream the image from the camera to a locally hosted website. That being said, the quality isn't quite what I wanted it to be so I've been wanting to replace the camera that comes with the ESP32-Cam by my ArduCamOV2640 MINI. Problem is, I'm unsure how to wire it. Here is the pin layout currently used :

define PWDN_GPIO_NUM 32

define RESET_GPIO_NUM -1

define XCLK_GPIO_NUM 0

define SIOD_GPIO_NUM 26

define SIOC_GPIO_NUM 27

define Y9_GPIO_NUM 35

define Y8_GPIO_NUM 34

define Y7_GPIO_NUM 39

define Y6_GPIO_NUM 36

define Y5_GPIO_NUM 21

define Y4_GPIO_NUM 19

define Y3_GPIO_NUM 18

define Y2_GPIO_NUM 5

define VSYNC_GPIO_NUM 25

define HREF_GPIO_NUM 23

define PCLK_GPIO_NUM 22

Hopefully someone can shed some light into the wiring of it ! Thank you!

[ArduCAM]

Please try this repo : https://github.com/ArduCAM/ArduCAM_ESP32S_UNO

[BillyBee123]

Doesn't the ESP32-cam dev board also use an OV2640 camera?

[ArducamSupport]

Doesn't the ESP32-cam dev board also use an OV2640 camera?

ESP32-Cam uses the same ov2640 sensor as ArduCamOV2640 MINI, but ArduCamOV2640 MINI uses spi to transmit image data and uses fewer pins.