Can't enter fractional speeds in Actions/Change Speed

ArduPilot / MissionPlanner

Mission Planner Ground Control Station for ArduPilot (c# .net)

http://ardupilot.org/planner/

GNU General Public License v3.0

1.78k stars 2.4k forks source link

Can't enter fractional speeds in Actions/Change Speed #2363

Open cjmssmd opened 4 years ago

cjmssmd commented 4 years ago

Issue details

I'd like to be able to tell my mower to change from 1 to 1.5 m/s using Mission Planner. But I can't since that entry box seems to limit to only integers., forcing me to decide between 1 and 2 m/sec.

Version

1.3.7314_23103

Steve-Scope commented 2 years ago

I have a similar issue when planning a mission for our boat. Would be great to be able to set a speed between 1 and 2m/sec. 1m/sec is probably ideal for bathymetric surveying, but just a bit too slow for big jobs; and 2m/sec starts to chew the battery too much. Would this be something anyone was interested to tackle? Allowing the speed settings to have one decimal place??

meee1 commented 2 years ago

which box are you refering too?

Steve-Scope commented 2 years ago

When planning a mission using 'AutoWP', Simple Grid, One of the settings you need to specify is the mission speed. It's in the 'Simple Options' box. See attached 20220607 Mission Speed .