Problem to change flight modes

[GiacomoMelloni]

Issue details

Please describe the problem, or desired feature

Currently, I see changing channel 5 value in Mission Planner, in particular in the Radio Calibration menu, but the flight modes in Flight Modes menu don't change and the Current PWM is always 0. I don't know if there is a relation whit this problem and the error PreArm that I have permanently.

Version

What version was the issue encountered with

Platform

[ ] All [ ] AntennaTracker [ x ] Copter [ ] Plane [ ] Rover [ ] Sub

Airframe type

What type of airframe (flying wing, glider, hex, Y6, octa etc) hex

Hardware type

What autopilot hardware was used? (pixhawk, pixracer, PX4FMU etc) APM 2.8

Logs

Please provide a link to any relevant logs that show the issue

[magicrub]

If pwm is zero, then it's not receiving that channel. Are your other channels working?

Please consider yourself your hardware. The 8bit APM 2.8 board was deprecated many years ago and runs very old firmware.

[GiacomoMelloni]

Thank you for the reply. In Radio Calibration menu I see changing channel 5 pwm when I control the switch, but in Flight Modes menu never. Could you recommend one at a low price?

Il giorno mar 1 set 2020 alle ore 19:40 Tom Pittenger < notifications@github.com> ha scritto:

If pwm is zero, then it's not receiving that channel. Are your other channels working?

Please consider yourself your hardware. The 8bit APM 2.8 board was deprecated many years ago and runs very old firmware.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ArduPilot/MissionPlanner/issues/2455#issuecomment-685023368, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQ2TVZBKZM4UHY4OZENWEO3SDUWXPANCNFSM4QR7AD6Q .