search

ArduPilot / MissionPlanner

Mission Planner Ground Control Station for ArduPilot (c# .net)
http://ardupilot.org/planner/
GNU General Public License v3.0
1.81k stars 2.42k forks source link

issue in mission planner can anyone tell me how to resolve it #3296

Closed Nani-735 closed 9 months ago

Nani-735 commented 9 months ago

Screenshot (230) Screenshot (229)

Issue details

Please describe the problem, or desired feature

Version

What version was the issue encountered with

Platform

[ ] All [ ] AntennaTracker [ ] Copter [ ] Plane [ ] Rover [ ] Sub

Airframe type

What type of airframe (flying wing, glider, hex, Y6, octa etc)

Hardware type

What autopilot hardware was used? (pixhawk, pixracer, PX4FMU etc)

Logs

Please provide a link to any relevant logs that show the issue

rmackay9 commented 9 months ago

Hi @Nani-735,

I don't think mission planner is connected to the vehicle using USB or a telemetry system. The error written reasonably clearly as it says, "Please connect first!".

I'll close this if that's OK but I'll still see replies.

Nani-735 commented 9 months ago

no i have connected usb but i am same error from few days

On Mon, Feb 26, 2024 at 9:33 AM Randy Mackay @.***> wrote:

Hi @Nani-735 https://github.com/Nani-735,

I don't think mission planner is connected to the vehicle using USB or a telemetry system. The error written reasonably clearly as it says, "Please connect first!".

I'll close this if that's OK but I'll still see replies.

— Reply to this email directly, view it on GitHub https://github.com/ArduPilot/MissionPlanner/issues/3296#issuecomment-1963279012, or unsubscribe https://github.com/notifications/unsubscribe-auth/BGONRTJ4TXBQY3QEDIH6DRTYVQCPTAVCNFSM6AAAAABDZOXF26VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNRTGI3TSMBRGI . You are receiving this because you were mentioned.Message ID: @.***>

rmackay9 commented 9 months ago

@Nani-735,

In the picture above, the Connect button is clearly disconnected.

Nani-735 commented 9 months ago

now i have connected the usb but i got same error

On Mon, Feb 26, 2024 at 10:44 AM Randy Mackay @.***> wrote:

@Nani-735 https://github.com/Nani-735,

In the picture above, the Connect button is clearly disconnected.

— Reply to this email directly, view it on GitHub https://github.com/ArduPilot/MissionPlanner/issues/3296#issuecomment-1963333297, or unsubscribe https://github.com/notifications/unsubscribe-auth/BGONRTMOZ7RPGKGFVAL7CM3YVQK3TAVCNFSM6AAAAABDZOXF26VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNRTGMZTGMRZG4 . You are receiving this because you were mentioned.Message ID: @.***>

rmackay9 commented 9 months ago

Hi @Nani-735,

Which version of ArduPilot is loaded onto the autopilot? Also which frame type (Copter, Rover, Plane)? Also can you please reduce the mission to just a single takeoff command and try again?

If that still doesn't work I might ask that you provide an onboard log which can be produced, even while disamred by setting LOG_DISARMED = 1.

I might also ask that you update Mission Planner on your PC by going to the Help screen and pressing the "Check for Updates" button.

By the way, writing waypoints is a very common thing for people to do so we would be overwhelmed with support requests if this was a general problem.

Nani-735 commented 9 months ago

Ok, I'll check it out.

On Mon, Feb 26, 2024 at 12:07 PM Randy Mackay @.***> wrote:

Hi @Nani-735 https://github.com/Nani-735,

Which version of ArduPilot is loaded onto the autopilot? Also which frame type (Copter, Rover, Plane)? Also can you please reduce the mission to just a single takeoff command and try again?

If that still doesn't work I might ask that you provide an onboard log which can be produced, even while disamred by setting LOG_DISARMED = 1.

I might also ask that you update Mission Planner on your PC by going to the Help screen and pressing the "Check for Updates" button.

By the way, writing waypoints is a very common thing for people to do so we would be overwhelmed with support requests if this was a general problem.

— Reply to this email directly, view it on GitHub https://github.com/ArduPilot/MissionPlanner/issues/3296#issuecomment-1963414754, or unsubscribe https://github.com/notifications/unsubscribe-auth/BGONRTM73GS7NEHN4EGXOX3YVQURZAVCNFSM6AAAAABDZOXF26VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNRTGQYTINZVGQ . You are receiving this because you were mentioned.Message ID: @.***>

Nani-735 commented 9 months ago

will you say how to do setup settings in mission planner

On Mon, Feb 26, 2024 at 2:19 PM TEJU @.***> wrote:

Ok, I'll check it out.

On Mon, Feb 26, 2024 at 12:07 PM Randy Mackay @.***> wrote:

Hi @Nani-735 https://github.com/Nani-735,

Which version of ArduPilot is loaded onto the autopilot? Also which frame type (Copter, Rover, Plane)? Also can you please reduce the mission to just a single takeoff command and try again?

If that still doesn't work I might ask that you provide an onboard log which can be produced, even while disamred by setting LOG_DISARMED = 1.

I might also ask that you update Mission Planner on your PC by going to the Help screen and pressing the "Check for Updates" button.

By the way, writing waypoints is a very common thing for people to do so we would be overwhelmed with support requests if this was a general problem.

— Reply to this email directly, view it on GitHub https://github.com/ArduPilot/MissionPlanner/issues/3296#issuecomment-1963414754, or unsubscribe https://github.com/notifications/unsubscribe-auth/BGONRTM73GS7NEHN4EGXOX3YVQURZAVCNFSM6AAAAABDZOXF26VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNRTGQYTINZVGQ . You are receiving this because you were mentioned.Message ID: @.***>

rmackay9 commented 9 months ago

Hi @Nani-735,

Copter setup is on the wiki here.

If you face issues with the setup it is best to report in the support forums. Here's the forum for Copter-4.4 (the stable version) and here's the forum for Copter-4.5 (our beta software).

Nani-735 commented 9 months ago

Awesome, thanks for the info!

On Wed, Feb 28, 2024 at 5:49 AM Randy Mackay @.***> wrote:

Hi @Nani-735 https://github.com/Nani-735,

Copter setup is on the wiki here.

If you face issues with the setup it is best to report in the support forums. Here's the forum for Copter-4.4 https://discuss.ardupilot.org/c/arducopter/copter-44/169 (the stable version) and here's the forum for Copter-4.5 https://discuss.ardupilot.org/c/arducopter/copter-45/174(our beta software).

— Reply to this email directly, view it on GitHub https://github.com/ArduPilot/MissionPlanner/issues/3296#issuecomment-1967955147, or unsubscribe https://github.com/notifications/unsubscribe-auth/BGONRTIXUVWJB3QRMIGIIF3YVZZYNAVCNFSM6AAAAABDZOXF26VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNRXHE2TKMJUG4 . You are receiving this because you were mentioned.Message ID: @.***>