search

ArduPilot / ardupilot

ArduPlane, ArduCopter, ArduRover, ArduSub source
http://ardupilot.org/
GNU General Public License v3.0
10.82k stars 17.28k forks source link

Matek f405-STD reboot in flight #11271

Closed kiryam closed 5 years ago

kiryam commented 5 years ago

Bug report

Issue details

I had crash today, it looks like reboot in flight. Look at the video (17s) I just fly in CRUISE, after that video gone. After a few seconds video back, but no telemetry on osd.

Version 3.10.0-dev (b1bc4268)

Platform [ ] All [ ] AntennaTracker [ ] Copter [ X ] Plane [ ] Rover [ ] Submarine

Airframe type airplane

Hardware type MATEK f405-STD

Logs 00000001.BIN.txt

https://youtu.be/2uI3km0nMs4

kiryam commented 5 years ago

I found that I have stalled sero on left wing. But it stalled in neutral position. Look like servo was stalled. Controller rebooted and moved servo on the right wing up. after that I had a crush.

fikusir commented 4 years ago

Just happenedto me as well. Have you find the reason why it happened to you? Me not

rmackay9 commented 4 years ago

@fikusir,

reboots can happen for a few reasons - the most common is probably a power issue but recent versions of ArduPilot include an "independent watchdog" that records a message in the next log after the flight that ended in a reboot caused by a software failure.

If you had a telemetry connection you may also have seen "Watchdog" appear on the HUD or OSD.

So ideally it would be good to see the logs of the flight in question and the next log if possible.

ValeraSokot commented 1 year ago

Привет. У меня точно такая же проблема. Получилось ли тебе найти причину перезагрузки ?

ValeraSokot commented 1 year ago

https://www.youtube.com/watch?v=SIjuAKOhuOg&ab_channel=%D0%B2%D0%B0%D0%BB%D0%B5%D1%80%D0%B0%D1%88%D0%BE%D0%BA%D0%BE%D1%82

kiryam commented 1 year ago

@ValeraSokot I think problem was been with servo. It locks on max position -> current draws goes high -> power module overloaded.

ValeraSokot commented 1 year ago

так ты заменил серву и проблема ушла ?

kiryam commented 1 year ago

Sorry, I don't remember already.

On Sun, Jun 25, 2023 at 12:17 AM ValeraSokot @.***> wrote:

так ты заменил серву и проблема ушла ?

— Reply to this email directly, view it on GitHub https://github.com/ArduPilot/ardupilot/issues/11271#issuecomment-1605733536, or unsubscribe https://github.com/notifications/unsubscribe-auth/AABD2ENXS5JSL7V7FIGCBODXM5KPVANCNFSM4HKZYU5Q . You are receiving this because you modified the open/close state.Message ID: @.***>

ValeraSokot commented 1 year ago

Плохо конечно что не помниш , ладно спасибо буду искать дальше.