ESC connected to LED pin (servo 13)
SERVO_BLH_3DMASK,0
SERVO_BLH_AUTO,1
SERVO_BLH_DEBUG,0
SERVO_BLH_MASK,4096
SERVO_BLH_OTYPE,4
SERVO_BLH_POLES,14
SERVO_BLH_PORT,0
SERVO_BLH_RVMASK,0
SERVO_BLH_TEST,0
SERVO_BLH_TMOUT,0
SERVO_BLH_TRATE,0
SERVO_DSHOT_ESC,0
SERVO_DSHOT_RATE,0
After 4-5 attemps to connecting via https://esc-configurator.com/ it connect to ESC. I try flash actual BlueJay firmware and it bricked.
I try flash original firmware via BLHeliSuite16714902a but i receive this (try different speeds)
after this i flash betaflight and flash ESC without problem.
Version 4.1.6 Plane
ESC connected to LED pin (servo 13) SERVO_BLH_3DMASK,0 SERVO_BLH_AUTO,1 SERVO_BLH_DEBUG,0 SERVO_BLH_MASK,4096 SERVO_BLH_OTYPE,4 SERVO_BLH_POLES,14 SERVO_BLH_PORT,0 SERVO_BLH_RVMASK,0 SERVO_BLH_TEST,0 SERVO_BLH_TMOUT,0 SERVO_BLH_TRATE,0 SERVO_DSHOT_ESC,0 SERVO_DSHOT_RATE,0 After 4-5 attemps to connecting via https://esc-configurator.com/ it connect to ESC. I try flash actual BlueJay firmware and it bricked. I try flash original firmware via BLHeliSuite16714902a but i receive this (try different speeds) after this i flash betaflight and flash ESC without problem. Version 4.1.6 Plane
Platform [ ] All [ ] AntennaTracker [ ] Copter [x] Plane [ ] Rover [ ] Submarine
Hardware type Matek H743 Wing V2
Logs esc-configurator-log.txt esc-configurator-log (1).txt