Closed freddybloggs closed 2 years ago
also fails with ardupilot release Matek F765 SE 4.2.0, added new pictures to http://www2.stigs.org/firm_prob as available serial options also change when "corrupted"
I have managed to get hold of a windows machine to test with MissionPlanner I can install firmware then if I get the full parameter list it is fine the 1st time, If I press the disconnect button then reconnect once or twice it will then say "Missing Params 1123 vs 1122"
This seems to have been fixed, I used 4.30dev from 30th of may and the problem seems to have disappeared
Bug report
MATEKSYS F765-WSE firmware seems to be getting corrupted after reboot
Issue details MATEKSYS F765-WSE latest software stable software from the GUI also has the same problem with the current git repository
Please describe the problem When rebooting my MATEKSYS F765-WSE the firmware seems to be getting corrupted when in QGroundControl parameters from Serial2_PROTOCOL on I get "unknown" for any of the lower protocols also bps changes to 57 or 115 instead of 57600 and 115200 reflashing the firmware fixes this problem for 1 or 2 power ons I have set board options to 5 no difference.
I have put pictures at http://www2.stigs.org/firm_prob to show the before and after reboot
Version What version was the issue encountered with MATEKSYS F765-WSE latest software stable software from the GUI also has the same problem with the current git repository 4.30dev Platform [ ] All [ ] AntennaTracker [ * ] Copter [ ] Plane [ ] Rover [ ] Submarine
Airframe type What type of airframe (flying wing, glider, hex, Y6, octa etc) Quad X4 Hardware type What autopilot hardware was used? (Pixhawk, Cube, Pixracer, Navio2, etc) MATEKSYS F765-WSE Logs Please provide a link to any relevant logs that show the issue http://www2.stigs.org/firm_prob