Open knoppixmeister opened 1 week ago
On the H743 please try setting RELAY2_DEFAULT
to 1.
Yes. With RELAY2_DEFAULT=1 on Matek H743 everything works fine.
Note: Users of Matek H743 also should choose voltage and solder Vsw bridge
The same thing should work on the Matek F405-TE, but I would have expected that to have come across in the update if you had enabled it on 4.4.
Analog video cameras does not switching on ArduPlane v4.5.4 and 4.6-dev as described here: https://ardupilot.org/copter/docs/common-matekf405-te.html#camera-and-supply-switch
but tested on ArduPlane-4.4.1 and everything works.
Same problem appears also on Matek H743
Version ArduPlane v4.5.4 and 4.6.0-dev
Platform [ ] All [ ] AntennaTracker [ ] Copter [ X ] Plane [ ] Rover [ ] Submarine
Airframe type Plane
Hardware type Matek F405-TE