Switch icon dimmed in the App (HomeyDash)when on

[markwi]

In this comment you said that in the App (and HomeyDash), the icon is dimmed in the off-state.

https://github.com/ArjanKranenburg/virtual-devices/issues/9#issuecomment-320991509

Mine seems to be reversed, dimmed when on and vice versa.

[ArjanKranenburg]

Thanks for reporting. Do you have some more information?

• Flow-cards
• Is it always reversed or once in a while?
• Is it still reversed after, say, 5 minutes or only when just changed?
• What capabilities did you use in the Virtual Device?
• Do all your Virtual Devices have this issue?
• Anything else that could be of importance...

[markwi]

These are the Flow-cards from 2 diffrent switches:

• Is it always reversed or once in a while? Yes, it is always reversed.
• Is it still reversed after, say, 5 minutes or only when just changed? It seems like it changes when i use the switch. Than it stays in that position. Sometimes the switch doesn't work immediately, so i have to press it multiple times, it looks like the position changes at that point. -What capabilities did you use in the Virtual Device? I've selected device to install, after that i've selected "light" as class.
• Do all your Virtual Devices have this issue? It seems like it. The flows from the two switches are made different at the "when" condition. In one flow, i choose the "virtual Device" app as an event for the "when" condition.

In the other flow, i've chosen for VD in "devices".

[markwi]

ArjanKranenburg Issue seems to be fixed. It seems there was a problem with the flows. As event by "When" i've stopped using the app (Virtual Devices). instead i choose the VD device. I also made some changes in choosing the condions ( some left blank). I think that the use of 2 different VD's (in combination with poor flows) caused the reverse of the VD (dimmed when on and bright when off). With my new flows, everything works perfect.