search

Arksine / katapult

Configurable bootloader for Klipper
GNU General Public License v3.0
390 stars 67 forks source link

Can't get this to work on Fly ERCF or BTT Manta M8P #115

Closed alidaf closed 2 months ago

alidaf commented 3 months ago

I've been struggling with this since I bought these nearly a year ago, when Katapult was still Canboot. I'm having another go but getting nowhere with either of these boards. I seem to be able to get the bootloader onto the M8P but then nothing else beyond that. The ERCF should be much simpler and has step by step instructions here. I've tried both CanBUS and USB but both fail. USB fails to provide a serial by-id and CanBUS fails to give me a CAN ID. The M8P instructions are all over the place, often conflicting, and in many places out of date but there remains no succinct guide for Katapult that I've managed to get working. The best there is is here, but it veers off course, becomes confusing and out of date in parts. I am also using a CB1 with Armbian and this may be the root of the issue but this seems to be the unofficially supported distro for BTT instead of their out of date version of Raspbian.

Creo2005 commented 3 months ago

try by analogy only the config of your board https://maz0r.github.io/klipper_canbus/controller/monster8v2.html https://mellow-3d.github.io/index.html

alidaf commented 3 months ago

try by analogy only the config of your board https://maz0r.github.io/klipper_canbus/controller/monster8v2.html https://mellow-3d.github.io/index.html

That links to the ERCF instructions that I've been using to no effect.

Dersonje commented 2 months ago

Same here. Followed other pages but flashing in DFU mode doesn't work either. I see the CAN adapter but no /dev/serial is made

alidaf commented 2 months ago

Same here. Followed other pages but flashing in DFU mode doesn't work either. I see the CAN adapter but no /dev/serial is made

Try this. It helped me get everything working. The problem is that there are so many posts all over the place with differing and even conflicting instructions but this guide has been pretty much definitive for me.