Closed b1alek closed 5 months ago
This appears to be an issue with Klipper. I would suggest using the Klipper Discourse for assistance.
As no one has been able to provide further feedback I'm going to close this. If you are still having issues I recommend asking for assistance on the Klipper Discourse.
What happened
Tried to make clean install on fresh SDHC card attached with printer, however issiue persist.
No matter if I;ll try to home using Fluidd or Mainsail - both homing operations makes MCU shutdown
It seems not to be related with bananapi usage
iostat -h
Linux 6.1.63-current-sunxi (bananapi) 01/09/2024 armv7l (2 CPU)
avg-cpu: %user %nice %system %iowait %steal %idle 18.6% 0.1% 11.0% 2.5% 0.0% 67.8%
in klipper there is relevant
Receive: 99 3719.826001 3719.821624 12: seq: 12, shutdown clock=2506874554 static_string_id=Timer too close Transition to shutdown state: MCU 'mcu' shutdown: Timer too close
Client
Mainsail, Fluidd
Browser
Chrome
How to reproduce
bananapi A20
Additional information
G28 Z moonraker G28 issiue.log G28 Z klippy G28.log
G28 X moonraker (2).log moonraker (1).log klippy (11).log