search

Armchair-Heavy-Industries / Xol-Toolhead

Xol Toolhead is the evolution of 'Mantis Xol 2'. Aimed at modularity and quality of life improvements for installation and serviceability. We have left the mantis carriage behind, and thus are now just Xol sans Mantis. Don't worry, it's still a bit ugly. We wouldn't fix that.
Other
434 stars 54 forks source link

LED Duct Interference Fit Issues #33

Closed uosdwishpoom closed 2 months ago

uosdwishpoom commented 5 months ago

Both bottom PCF to LED Duct screws are an interference fit which is causing misalignment and ducts to split at the screw location. Honeybadger fans from Fabreeko don’t fit the opening in the duct. The fan and duct are .5mm from fitting along the long axis of the opening in the duct.

XOL DUCT ALIGNMENT ISSUE

DW-Tas commented 5 months ago

This is a duplicate of https://github.com/Armchair-Heavy-Industries/Xol-Toolhead/issues/17.

Regarding the length being 0.5mm too short, what material are you printing in, and what shrinkage compensation did you use?

uosdwishpoom commented 5 months ago

Fusion Filaments ABS 1.5 Uranium Yellow. Shrinkage compensation 99.2.

uosdwishpoom commented 4 months ago

Here is the solution I used and it worked great. image

rcg94 commented 4 months ago

Here is the solution I used and it worked great. image

Do you mind posting the file you made? Hoping to use it with my new honeybadger fans coming tomorrow

DW-Tas commented 2 months ago

Ducts are now integrated into hotend mounts and don't require screws in this location.