New Joint Format V3 - Githubissues

Upgrades include

Update joint wall thickness froom 2.6 to 4	https://github.com/ArroyoDev-LLC/3dframe/issues/27
Orient all joints and add built in permanent Print support	https://github.com/ArroyoDev-LLC/3dframe/issues/29
Re-calculate joints to fit standard 3/4" stick. My testing found that a 19.65 hole was the perfect snugness	https://github.com/ArroyoDev-LLC/3dframe/issues/16
For joints whose length is less than 3", reduce the length of the the leg accordingly #11	https://github.com/ArroyoDev-LLC/3dframe/issues/11
Beef up the inner core of joints and make sure wood sinks into the core.	https://github.com/ArroyoDev-LLC/3dframe/issues/8
Just confirm that EVERY leg hole is pricicely 1.5" deep.	https://github.com/ArroyoDev-LLC/3dframe/issues/5
Extend leg length when legs overlap bacause of minimal angle seperation	https://github.com/ArroyoDev-LLC/3dframe/issues/4
Confirm length calculations are accurate	https://github.com/ArroyoDev-LLC/3dframe/issues/13
Generate End Caps	https://github.com/ArroyoDev-LLC/3dframe/issues/7
Fine Tune updates to labels	https://github.com/ArroyoDev-LLC/3dframe/issues/28

[ ] only print a single Joint number (ID) like "18" somewhere on the surface where it wont get ruined by support
[ ] Joints will have a sticker wrapped on one leg where all 4 faces will boldly display its Letter ID (ex. "AA").
[ ] Joint legs will have new #7 Lip Caps for Strength. On these caps will either be printed or sticker wrapped with the target + distance in print on All 4 sides.
[ ] The Leg Caps will also have 1 off the 4 sides a special color indicating that it and its mate with the special color should face the same direction. This will ensure orienting the next joint properly for faster assembly.
[ ] Leg Caps will be rounded to be easier on your hands during assembly.
[ ] Join sticks will be grooved with the exact depth so that 1. the user will know when it is deep enough, and 2 will potentially now enjoy a new #2 Gripper feature where it will snap and hold in place.
[ ] Joint sticks will be painted Silver or grey to look cooler

ArroyoDev-LLC / 3dframe